Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] Re: Novice Question On Scanner Function

Expand Messages
  • Clark Rennie
    Ken, here s an easier to read manual. Go here http://marksscanners.com/396XT/396xt.shtml Maybe that will help. Clark Venice, Calif.
    Message 1 of 7 , May 23, 2012
    • 0 Attachment
      Ken,
      here's an easier to read manual.
      Go here http://marksscanners.com/396XT/396xt.shtml
      Maybe that will help.

      Clark
      Venice, Calif.


      At 04:09 PM 5/23/2012, you wrote:

      >I appreciate your reply UPMan/Paul. I had the scanner pre-programmed by
      >ScannerMaster largely because I know so little about them other than
      >turning them on and off, to be honest :(
      >
      >I'm in San Francisco, listening to SFPD and SFFD channels which I believe
      >are trunked. All was fine for a month when we received the scanner, then
      >the "glitch." I'm not sure enough about the diffrence between control
      >channel noise and voice traffic, but when the scanner is on and I tap the
      >HOLD button, I can hear both sides of the conversation on the PD channel
      >from dispatch and the field unit, but when I take the HOLD off and the
      >scanner returns to scanning all of the PD channels, it doesn't stop on any
      >transmissions at all.
      >
      >This probably doesn't help much :( I kinda wish there was an "Idiots
      >Guide" book lol.
    Your message has been successfully submitted and would be delivered to recipients shortly.