Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] Radio IDs Question

Expand Messages
  • MCH
    Last I checked (admittedly, a while) most of those required a discriminator tap and would not support the direct data from such scanners. So, the wheel was
    Message 1 of 8 , Mar 26, 2009
    • 0 Attachment
      Last I checked (admittedly, a while) most of those required a
      discriminator tap and would not support the direct data from such
      scanners. So, the wheel was changed on the scanner end and PRO96COM
      might be the only program that supports the "new wheel design".

      Joe M.

      Mike Iszak wrote:
      > Whyfor reinvent the wheel for P16. We have Trunker, TReport, Unitrunker, Trunk88 and probably a few others for P16
      > -----Original Message-----
      > From: MCH <mch@...>
      >
      > Date: Fri, 27 Mar 2009 02:01:53
      > To: <BCD396XT@yahoogroups.com>
      > Subject: Re: [BCD396XT] Radio IDs Question
      >
      >
      > Correct - PRO96COM currently only supports P25 systems. The author
      > intends to add P15 (3600) systems, but has not done so yet (unless I
      > missed it).
      >
      > The reason is until the release of the GRE scanners, the only scanners
      > with data output were the PRO-96 and PRO-2096 which only output P25
      > system data.
      >
      > As soon as he 'figures out' P16 systems, he says he will add them to the
      > program.
      >
      > Joe M.
      >
      > Frank Leidy wrote:
      >> Pro96Com only supports P25? It won't display radio IDs on a 3600 baud
      >> Motorola (Type II) system?
      >>
      >> Also, just wanted to confirm that Pro96Com does currently support the 396XT.
      >> I looked around a bit, but didn't find anything.
      >>
      >> Frank
      >> ----- Original Message -----
      >> From: <dmccorm@...>
      >> To: <BCD396XT@yahoogroups.com>
      >> Sent: Thursday, March 26, 2009 7:06 PM
      >> Subject: Re: [BCD396XT] Radio IDs Question
      >>
      >>
      >>> It does display RID's using Pro96Com on P25 systems and is supposedly able
      >>> to work with UniTrunker, but I have yet to get it to display anything.
      >>>
      >>> ---- tony70647 <tony70647@...> wrote:
      >>>> Will the new 396XT show Radio IDs using computer software with the
      >>>> Control Channel data stream turned on? Thanks Tony.
      >>>>
      >>>
      >>> ------------------------------------
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.