Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] Channel stays open

Expand Messages
  • Paul Opitz
    Assuming it isn t an actual stuck mic, two setting on the scanner might be suspect: 1) Be sure your squelch is not set too low. 2) Be sure End Code Detect is
    Message 1 of 2 , Aug 22, 2011
    • 0 Attachment
      Assuming it isn't an actual stuck mic, two setting on the scanner might be
      suspect:

      1) Be sure your squelch is not set too low.
      2) Be sure End Code Detect is enabled for the system.


       

      >
      >From: "petepry@..." <petepry@...>
      >To: BCD396XT@yahoogroups.com
      >Sent: Mon, August 22, 2011 9:43:03 AM
      >Subject: [BCD396XT] Channel stays open
      >

      >I have a 396xt also a 346xt and having the same problem on both radios. Margate
      >FD dispatch which is part of Coral Springs; the radio stays open on dispatch
      >channel. This just started about 2 weeks ago. I have set up the reband when
      >Coral Springs first rebanded. The control frequencies I have are;
      >853.87500
      >853.62500
      >852.5500
      >852.3000
      >The group for dispatch is, 49712.
      >Any help will be appreciated
      >Pete
      >
      >
      >

      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.