Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] Group Lockout Question...

Expand Messages
  • Lance
    Doesn t seem like that would be an issue. Guess I will try this see how the radio behaves... ... [Non-text portions of this message have been removed]
    Message 1 of 10 , May 2, 2011
    • 0 Attachment
      Doesn't seem like that would be an issue.

      Guess I will try this see how the radio behaves...


      On May 2, 2011, at 11:00 PM, MCH wrote:

      > I gotta ask, Jim. If you have that single channel, that will keep the
      > System 'alive', but how do you then get back to it to re-enable a GQK,
      > as a single channel will scan extremely fast.
      >
      > Joe M.
      >
      > Jim Walls wrote:
      > > On 5/2/2011 1:30 PM, Lance wrote:
      > >> I had two groups scanning under a system the other day and in disabling one, I then disabled the other.
      > >>
      > >> I was not able to bring the groups back up again. I went and unlocked them, but had no luck. Had to use
      > >>
      > >> FreeScan to fix the problem.
      > >>
      > >> So, if I inadvertently do this again in the future, how does one bring the groups back without using software.
      > >
      > > My solution to this problem is to program one channel in each system
      > > that is in a group all to itself and has NO Group Quick Key. The
      > > channel is set to NEVER hear anything. The result is that under no
      > > circumstances will every group in the system be locked out and
      > > therefore, it's easy to bring the desired groups back.
      > > I found this MUCH easier then having to remember how to do the procedure
      > > (or to do it while driving).
      > >
      >



      [Non-text portions of this message have been removed]
    • Lance
      Just did your method, works great... Thanks. ... [Non-text portions of this message have been removed]
      Message 2 of 10 , May 2, 2011
      • 0 Attachment
        Just did your method, works great...

        Thanks.


        On May 2, 2011, at 10:05 PM, Jim Walls wrote:

        > On 5/2/2011 8:42 PM, Lance wrote:
        > > Can you explain this in another way perhaps?
        >
        > Sure. Best way is to use an example. For this example I have a system
        > for the Los Angeles County Sheriff's Dept. In that system I have 8
        > groups which have Group Quick Keys 1 - 8. I also create a 9th group
        > which has NO Group Quick Key and has only one channel programmed. I
        > call that 9th group "Keep alive" and I name the one channel in that
        > group "Keep alive". The frequency programmed in 500.025 with some DPL
        > on receive. Since that is the bottom of TV channel 19 which happens not
        > to be used for TV here in Los Angeles, the squelch will never open on
        > the Keep alive channel.
        >
        > If I turn off all the Group Quick Keys, the "Keep alive" group will
        > still be active so therefore the rest of the groups can be turned back
        > on easily.
        >
        > In case you have not figured it out, I ONLY use System Quick Keys to
        > turn systems on and off, and ONLY use Group Quick Keys to turn groups on
        > and off.
        >
        > --
        > 73
        > -------------------------------------
        > Jim Walls - K6CCC
        > jim@...
        > Ofc: 818-548-4804
        > http://members.dslextreme.com/users/k6ccc/
        > AMSAT Member 32537 - WSWSS Member 395
        >
        >



        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.