Re: [BCD396XT] tag/mark conventional frequency
- By any chance are you related to a Richy Victor that was an ABC-TV director in Chicago at WBKB or later at WLS-TV during the 1970's.
I am trying to find people from that era.
From: Richard A. Victor <Victor@...>
Sent: Thu, March 11, 2010 4:03:11 PM
Subject: Re: [BCD396XT] tag/mark conventional frequency
There's a list of the frequencies that are subject to the IFX on the
Frequencies tab in the Scanner --> Set Scanner Options screen.
You could also use the volume offset and that even gives you 6 values
other than the default of 0 so that you could assign some type of
code perhaps to your tag/mark.
At 01:58 PM 3/11/2010, you wrote:
>OK. I can see where attenuation would show up in FreeScan but I can't[Non-text portions of this message have been removed]
>seem to find where IFX state would show. My BCD396XT is on the UPS truck
>to be delivered today
>Paul Opitz wrote:
> > You could toggle either the attenuation state or the IFX state
> (HOLD, then F+7 or F+4).
> > Is there a way to tag/mark a single conventional frequency fairly
> easy out in the field to be able to tell if I had or had not heard
> that frequency to upload to FreeScan at home later?