Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] Decoding simulcast P25 systems

Expand Messages
  • johnstark
    I have no clue, but they failed when it was between 10 above and -12 with wind chills as low -35 John ... From: Mike To:
    Message 1 of 16 , Jan 25, 2009
    • 0 Attachment
      I have no clue, but they failed when it was between 10 above and -12 with
      wind chills as low -35

      John


      ----- Original Message -----
      From: "Mike" <pyro68@...>
      To: <BCD396XT@yahoogroups.com>
      Sent: Sunday, January 25, 2009 5:23 PM
      Subject: Re: [BCD396XT] Decoding simulcast P25 systems


      >A little OT, but what brand of microwaves? We run Harris Constellations
      > and while they normally run between 50 and 80 degrees ambient temps,
      > we've had them run fine as low as 35 degrees in the site.
      >
      > Mike
      >
      > ----- Original Message -----
      > From: "johnstark" <johnstark@...>
      > Sent: Wednesday, January 21, 2009 1:33 PM
      > Subject: Re: [BCD396XT] Decoding simulcast P25 systems
      >
      >
      > Sloppy install to start with, and not fixing it during maintenance,
      > gllobal
      > warming is a joke in my book, and it won't affect the system other than
      > needing better cooling in the summer. Kind of odd situation here with a
      > P16
      > statewide system last week where they had to put heaters at some
      > microwave
      > sites because they got too cold and failed.
      >
      > John
      >
      >
      > ----- Original Message -----
      > From: "Larry Koch" <larrykoch@...>
      > To: <bcd396xt@yahoogroups.com>
      > Sent: Wednesday, January 21, 2009 11:21 AM
      > Subject: RE: [BCD396XT] Decoding simulcast P25 systems
      >
      >
      >
      > Good explanation John. I have the same problem as Peter described and I
      > am
      > also hoping that the XT will do better. I have tried every digital
      > trunking
      > scanner on the market (RS 2096, 96 - Uniden 996, 396 - PSR 600, 500) and
      > had
      > mixed results with them all.
      >
      > John, is the timing problem caused by sloppy maintenance, faulty design,
      > poor manufacturing or global warming?
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.