Re: [BCD396XT] Help
- Actually, it's not that it's digital that makes it more complex, but
rather that it is a trunked system rather than the conventional
channels that you were probably used to with you previous
scanner. Once you learn to use software to program the scanner,
these things will become routine and easy once more.
At 07:33 AM 9/1/2009, you wrote:
>Thanks so much for the info and advice. I knew progaming the
>digital was going to be a challege but I didnt realize that I would
>have to program the whole thing. Thanks again!
>--- On Mon, 8/31/09, Richard A. Victor <Victor@...> wrote:
>From: Richard A. Victor <Victor@...>
>Subject: Re: [BCD396XT] Help
>Date: Monday, August 31, 2009, 7:48 PM
>It appears that Wilmington FD is primarily on the state's digital
>system which is listed here:
>http://www.radioref erence.com/ apps/db/? sid=411
>Some of the fire channels are patched to varous conventional
>frequencies as shown here:
>http://www.radioref erence.com/ apps/db/? ctid=313
>While you could program both aspects manually from the keyboard, as a
>practical matter you'd be better off downloading one of the programs
>that allows you (with a premium subscription) to download the data
>directly from RadioReference into the program and then to transfer it
>to the scanner. FreeScan is a good choice for software to do that.
>If your computer has a serial port, you're all set. If not, you need
>to get either a serial to USB adapter or the Uniden USB-1 cable which
>includes the adapter as part of the cable. In those cases, be sure
>to install the driver before connecting the cable.
>If you choose to not get a RR premium subscription, you can use the
>EZGrab feature in FreeScan to import the data via the computer
>clipboard or you can type it in.
>Unfortunately, doing all of this the first time can be a bit
>daunting. Take it one step at a time and come back if you run into
>At 03:16 PM 8/31/2009, you wrote:
> >Just got my new 396 xt and need so help.
> >1) how can I simply scan local Fire services like the older uniden
> >2) can someone help me program the wilmington Delaware fire
> >department into my scanner?
- You've enabled a search mode. While scanning the Marine frequencies,
press FUNC L/O L/O and it will permanently lock out the Marine search.
On 5/27/2015 6:48 PM, sparkchsr54@... [BCD396XT] wrote:
> Thanks again for all the help in the past I now have a new problem. All
> the sudden while trunk tracking I'm getting the Marine band scanning
> with convention frequencies how do I shut them off. The ID scan and ID
> search is in ID Scan mode.
> Thanks Again
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2012.0.2250 / Virus Database: 4311/9376 - Release Date: 05/27/15