Loading ...
Sorry, an error occurred while loading the content.

Re: Help with Programming Moto Type II UHF Trunked mixed analog/digtal system

Expand Messages
  • Troy
    I had the same problem when I first tried to program the NSW GRN UHF omnilink system here in Australia. As soon as you add the lo and hi channel numbers it
    Message 1 of 4 , Aug 13 7:31 PM
    • 0 Attachment
      I had the same problem when I first tried to program the NSW GRN UHF omnilink system here in Australia. As soon as you add the lo and hi channel numbers it solves the problem.



      --- In BCD396XT@yahoogroups.com, Brian <chicagostretch2002@...> wrote:
      >
      > OK, thanks I will give that a shot when i get home this afternoon. Thanks for the quick reply Paul. Oh, by the way...You guys really hit a grand slam with this XT. It's a minor adjustment after mastering all the keys and functions of the 396T but this is the best product on the market in my opinion. It truly is. Thanks again!
      >
      >
      >
      >
      > ________________________________
      > From: Uniden UPMan <uniden.upman@...>
      > To: BCD396XT@yahoogroups.com
      > Sent: Friday, August 7, 2009 8:52:57 AM
      > Subject: Re: [BCD396XT] Help with Programming Moto Type II UHF Trunked mixed analog/digtal system
      >
      >  
      > It is for UHF systems, too. See:
      > http://info. uniden.com/ twiki/bin/ view/UnidenMan4/ Calculatingupper basefrequencies
      >
      > (The spreadsheet on that page will calculate the upper base frequencies for you.)
      >  UPMan
      >
      > ____________ _________ _________ __
      > From: Bobby Ray Ransom <chicagostretch2002@ yahoo.com>
      > To: BCD396XT@yahoogroup s.com
      > Sent: Friday, August 7, 2009 8:47:00 AM
      > Subject: [BCD396XT] Help with Programming Moto Type II UHF Trunked mixed analog/digtal system
      >
      >  
      > The old 396 was easy...select UHF 400Mhz trunked, program and listen. I have tried programming the O Hare and Midway Airport UHF trunked systems in the XT and it scans/searches but doesn't stop on active talkgroups. I tried programming again. Aside from base, offset, etc., there is a 'enter lo' and 'enter hi' frequency section. Is that where I am going wrong?.... I thought that was only for rebanded stuff?....
      > Maybe I am not reading the manual correctly, but how do I program those UHF trunked systems....No, they are not P25 systems.
      >
      > Thanks in advance
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.