Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] cc data output connection

Expand Messages
  • johnstark
    Member ID is the affiliated radio ID I believe. Paul can answer that one better than I can. Patch ID are the two radio ID s that are patched so they are the
    Message 1 of 6 , Nov 27, 2008
    • 0 Attachment
      Member ID is the affiliated radio ID I believe. Paul can answer that one
      better than I can.
      Patch ID are the two radio ID's that are patched so they are the radio ID's,
      but only appear during a patch the way I read it.

      John


      ----- Original Message -----
      From: "Frank Leidy" <fleidy@...>
      To: <BCD396XT@yahoogroups.com>
      Sent: Thursday, November 27, 2008 7:35 PM
      Subject: Re: [BCD396XT] cc data output connection


      > John,
      >
      > I took a look at the manual from the link UPMan posted a few days ago. I
      > am
      > by no means an expert on CC data. I was looking at the data for the
      > Decoded
      > Descriptions for Motorola systems (Page 123). I really don't see anything
      > in the message that looks like a radio ID. There are quite a few terms on
      > that page that I don't understand (LCN, Member ID, Patch ID). Nothing
      > really sticks out as a radio ID.
      >
      > Also, while I'm on here. I have to give kudos out to Uniden. My first
      > look at the manual was very quick. I missed two important things: the
      > command reference and the character set patterns.
      >
      > I'm looking at building my own software. I've got a basic one written for
      > my 396. I cheated and don't show the display. I could never figure out
      > how
      > to interpret some of the non-ASCII characters that the radio was showing
      > on
      > some lines. I knew they were things like the signal bar and such. It
      > turns
      > out all I had to do was match the hex that was coming back to one of
      > these.
      >
      > Thanks for giving me my missing link.
      >
      > Frank
      >
      > ----- Original Message -----
      > From: "johnstark" <johnstark@...>
      > To: <BCD396XT@yahoogroups.com>
      > Sent: Thursday, November 27, 2008 1:52 PM
      > Subject: Re: [BCD396XT] cc data output connection
      >
      >
      >> The included cable used for programing and updated firmware appears to be
      >> the same used for the CC data, from what I have heard you use the same
      >> port
      >> as well, makes sense though since there is only one port.
      >>
      >> Radio ID's - if using an external program you'll have the ID's
      >>
      >> John
      >>
      >>
      >> ----- Original Message -----
      >> From: "craigheld18" <craigheld18@...>
      >> To: <BCD396XT@yahoogroups.com>
      >> Sent: Thursday, November 27, 2008 10:29 AM
      >> Subject: [BCD396XT] cc data output connection
      >>
      >>
      >>> does anybody know how the scanner will connect to a computer to
      >>> monitor the cc data ? Will the data cable be provided ? and also just
      >>> wondering if any future firmware is in the development for the
      >>> bcd396xt to display user radio id's .
      >>>
      >>> Thanks
      >>>
      >>>
      >>> ------------------------------------
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.