Loading ...
Sorry, an error occurred while loading the content.

8623Re: [BCD396XT] Re: Illegal Voltage?

Expand Messages
  • MCH
    Dec 11, 2013
    • 0 Attachment
      Is that with the charging switch off? If not you still have the load of the cells.

      Joe M.


      On Dec 11, 2013, at 8:28 PM, "kwicker" <kwicker@...> wrote:

      > The reason I didn't expect the current load is that with the scanner turned off, when I insert the DC power plug, the message "Illegal Voltage" comes up on the blank screen.
      >
      >
      > --- In BCD396XT@yahoogroups.com, "kwicker" <kwicker@...> wrote:
      >>
      >> I get a message on the display that says Illegal Voltage when I plug in the car DC power supply that came with the scanner to the 396. The unit will not operate as long as the message is there. I tested the voltage on the connector and got 7.04 VDC with the tip positive. I have an older Radio Shack mobile DC power plug that will operate the 396 without the error message. It measures 6.94 VDC with the tip positive. The AC/DC power supply that came with the 396 measures 7.01 VDC with the tip positive. The display on the 396 indicates 4.01 to 4.03 volts with the two supplies that work. I'd like to use the power plug that came with the scanner. It's smaller, is fused, and has a red indicator light. What's up with the Illegal Voltage message? Thanks in advance for all input.
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo Groups Links
      >
      >
      >
    • Show all 8 messages in this topic