Loading ...
Sorry, an error occurred while loading the content.

7044Re: Pin Plug Additional...

Expand Messages
  • Alex
    Oct 21, 2012
    • 0 Attachment
      I don't have the part numbers but both sites have good search engines that filter by specification so you'll be able to find the parts pretty easily.

      --- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@...> wrote:
      >
      > Alex,
      > I was thinking of doing that.  Radio Shack's connector series has a loose spec from what I read on Wikipedia.
      > Do you have part numbers from mouser and digikey?  That would be helpful.
      > Thanks again,
      > -Lance
      >
      >
      > --- On Sun, 10/21/12, Alex <agcme2002@...> wrote:
      >
      > From: Alex <agcme2002@...>
      > Subject: [BCD396XT] Re: Pin Plug Additional...
      > To: BCD396XT@yahoogroups.com
      > Date: Sunday, October 21, 2012, 7:51 PM
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >  
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > --- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@> wrote:
      >
      > >
      >
      > > Looks like the slight play in the way the plug feels once seated in the radio is due to the  EIAJ TYPE-II jack has an O.D. of 4.4mm, while the plug (Adaptaplug "B") from Radio Shack is spec'd at 4.0mm, so 4 tenths of a millimeter in difference...
      >
      > > Anyone know where I can source the plugs Uniden uses?
      >
      > > Thanks,
      >
      > > -Lance
      >
      >
      >
      > If you don't mind cutting the cord and splicing a whole new connector on there then go to Digikey or Mouser. They have the proper sized barrel connector in both straight and right angle configurations.
      >
      >
      >
      > I made my own 12 volt adapter and bought a cord from Digikey (Mouser has the same ones, too) that had a molded, right angle connector on the end. Works fine, no loose connections.
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    • Show all 4 messages in this topic