Loading ...
Sorry, an error occurred while loading the content.

6809Re: [BCD396XT] Re: Scanning Help

Expand Messages
  • Lance
    Jul 13, 2012
    • 0 Attachment
      your conventional system and your trunk system need to be separate.

      Is your trunk system locked out?

      Do you have a quick key assigned to it?


      On Jul 13, 2012, at 9:32 AM, Kristy wrote:

      > I entered some frequencies in the Conventional System and it is now scanning those. But I have several talkgroups stored under the P-25 system but it won't can those. It will only scan the Conventional System.
      >
      > --- In BCD396XT@yahoogroups.com, Uniden UPMan <uniden.upman@...> wrote:
      > >
      > > If there are no frequencies in the system, then the scanner will have no ability to scan or receive it. Matters tremendously.
      > > �
      > > SQK= System or Site Quick Key.
      > > GQK=Group Quick Key
      > > �
      > > http://info.uniden.com/twiki/pub/publish/QuickKeys.html
      > >
      > > UpMan
      > > UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before emailing me directly
      > >
      > >
      > > >________________________________
      > > > From: Kristy <ziebarth715@...>
      > > >To: BCD396XT@yahoogroups.com
      > > >Sent: Friday, July 13, 2012 9:13 AM
      > > >Subject: [BCD396XT] Re: Scanning Help
      > > >
      > > >
      > > >
      > > >�
      > > >
      > > >I already have several channels programmed into the ARMER system. I can see them when I try to edit the system. But I can't get it to scan. What is SQK and GQK?
      > > >
      > > >As I was writing this, I noticed that there were no frequencies stored under the sit name. Would that matter?
      > > >
      > > >--- In mailto:BCD396XT%40yahoogroups.com, Paul Opitz <pmanu44@> wrote:
      > > >>
      > > >> The��� answer depends on why ARMER isn't being scanned. It could be:
      > > >> * Enable the SQK assigned to the nearest ARMER site and disable the SQK
      > > >> assigned to the conventional system.
      > > >> * Unlock the site and lock out the conventional system.
      > > >> * Program the site correctly and delet the conventional system.
      > > >> * Enable the GQK assigned to the channel group(s) in the ARMER system.
      > > >> * Unlock the channel group(s) in the ARMER system.
      > > >> * Program some channels into a channel group in the ARMER system.
      > > >> * ...
      > > >>
      > > >>
      > > >>
      > > >> ________________________________
      > > >> From: Kristy <ziebarth715@>
      > > >> To: mailto:BCD396XT%40yahoogroups.com
      > > >> Sent: Wed, July 11, 2012 7:36:06 PM
      > > >> Subject: [BCD396XT] Scanning Help
      > > >>
      > > >> ���
      > > >> I've had my scanner for well over a year and never been able to figure it out. I
      > > >> have two groups: a conventional system and the ARMER group. My scanner will only
      > > >> scan the conventational group which has no channels in it. How do I get it to
      > > >> scan the ARMER system instead of the other one?
      > > >>
      > > >>
      > > >>
      > > >>
      > > >>
      > > >> [Non-text portions of this message have been removed]
      > > >>
      > > >
      > > >
      > > >
      > > >
      > > >
      > >
      > > [Non-text portions of this message have been removed]
      > >
      >
      >



      [Non-text portions of this message have been removed]
    • Show all 17 messages in this topic