Loading ...
Sorry, an error occurred while loading the content.

6808Re: Scanning Help

Expand Messages
  • Kristy
    Jul 13, 2012
      I entered some frequencies in the Conventional System and it is now scanning those. But I have several talkgroups stored under the P-25 system but it won't can those. It will only scan the Conventional System.



      --- In BCD396XT@yahoogroups.com, Uniden UPMan <uniden.upman@...> wrote:
      >
      > If there are no frequencies in the system, then the scanner will have no ability to scan or receive it. Matters tremendously.
      >  
      > SQK= System or Site Quick Key.
      > GQK=Group Quick Key
      >  
      > http://info.uniden.com/twiki/pub/publish/QuickKeys.html
      >
      > UpMan
      > UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before emailing me directly
      >
      >
      > >________________________________
      > > From: Kristy <ziebarth715@...>
      > >To: BCD396XT@yahoogroups.com
      > >Sent: Friday, July 13, 2012 9:13 AM
      > >Subject: [BCD396XT] Re: Scanning Help
      > >
      > >
      > >
      > > 
      > >
      > >I already have several channels programmed into the ARMER system. I can see them when I try to edit the system. But I can't get it to scan. What is SQK and GQK?
      > >
      > >As I was writing this, I noticed that there were no frequencies stored under the sit name. Would that matter?
      > >
      > >--- In mailto:BCD396XT%40yahoogroups.com, Paul Opitz <pmanu44@> wrote:
      > >>
      > >> The answer depends on why ARMER isn't being scanned. It could be:
      > >> * Enable the SQK assigned to the nearest ARMER site and disable the SQK
      > >> assigned to the conventional system.
      > >> * Unlock the site and lock out the conventional system.
      > >> * Program the site correctly and delet the conventional system.
      > >> * Enable the GQK assigned to the channel group(s) in the ARMER system.
      > >> * Unlock the channel group(s) in the ARMER system.
      > >> * Program some channels into a channel group in the ARMER system.
      > >> * ...
      > >>
      > >>
      > >>
      > >> ________________________________
      > >> From: Kristy <ziebarth715@>
      > >> To: mailto:BCD396XT%40yahoogroups.com
      > >> Sent: Wed, July 11, 2012 7:36:06 PM
      > >> Subject: [BCD396XT] Scanning Help
      > >>
      > >>  
      > >> I've had my scanner for well over a year and never been able to figure it out. I
      > >> have two groups: a conventional system and the ARMER group. My scanner will only
      > >> scan the conventational group which has no channels in it. How do I get it to
      > >> scan the ARMER system instead of the other one?
      > >>
      > >>
      > >>
      > >>
      > >>
      > >> [Non-text portions of this message have been removed]
      > >>
      > >
      > >
      > >
      > >
      > >
      >
      > [Non-text portions of this message have been removed]
      >
    • Show all 17 messages in this topic