6732Re: [BCD396XT] Another dumb question
- Jun 6, 2012OK. So I am programming the band plan and the scanner is asking me questions that the answer does not appear on the Scott AFB page.
When I enter "base freq" all goes well but it then asks "input upper/input lower" what are those?
When I enter "offset" it asks for polarity (+ or -) that is not listed either. How do I know what it is?
The scanner does not seem to hold what little info I have in the memory for the band plan. I am guessing it is because I am not doing it correctly.
Again sorry for being a pain, just wanting to get it right.
I guess I better go and check the user manual huh?
--- On Wed, 6/6/12, Clark Rennie <c.rennie1@...> wrote:
From: Clark Rennie <c.rennie1@...>
Subject: Re: [BCD396XT] Another dumb question
Date: Wednesday, June 6, 2012, 11:48 AM
I missed that info. under Custom Frequency Tables.
At 09:36 AM 6/6/2012, you wrote:
>There is no single band plan for a systgem with those frequencies. They
>could all use different band plans.
>That specific system''s band plan is shown on the RR database page:
>UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before
>emailing me directly
> >From: Clark Rennie <c.rennie1@...>
> >To: BCD396XT@yahoogroups.com
> >Sent: Wednesday, June 6, 2012 11:26 AM
> >Subject: Re: [BCD396XT] Another dumb question
> >What is the correct Band Plan for a system with these frequencies ?
> >At 06:47 AM 6/6/2012, you wrote:
> >>It should be programmed as a Motorola VHF system (not P25). You must enter
> >>the band plan for the system.
> >>Set all channels as digital.
> >>UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before
> >>emailing me directly
[Non-text portions of this message have been removed]
- << Previous post in topic Next post in topic >>