Loading ...
Sorry, an error occurred while loading the content.

6557Re: Systems With Separate Base & Mobile Channels

Expand Messages
  • david40_33711
    Apr 9, 2012
    • 0 Attachment
      Yep, sure did.

      --- In BCD396XT@yahoogroups.com, MCH <mch@...> wrote:
      >
      > Re-read my post, as I think you misread it.
      > I never mentioned the FUNC button.
      >
      > And holding on a system can be done as I described. Try it.
      >
      > Joe M.
      >
      > david40_33711 wrote:
      > > That's not true. Holding the Func Button locks or unlocks the Funtion Mode by toggling it on or off.
      > > Holding on a system can be done by toggling the rest of the systems off, or assigning a system to a quick key.
      > >
      > > --- In BCD396XT@yahoogroups.com, MCH <mch@> wrote:
      > >> If you hold the HOLD button, you will put the scanner into System
      > >> Hold mode. To exit this mode, just hold the HOLD button again.
      > >>
      > >> Joe M.
      > >>
      > >> Tony Olivero wrote:
      > >>> All:
      > >>>
      > >>>
      > >>>
      > >>> Our local state police are still using some low band channels with base
      > >>> stations on one cfrequency and mobiles on another. An LTR system I
      > >>> occasionally monitor exhibits similar behavior. Is it possible to get the
      > >>> x96XT to hold on a system for a few seconds to see if a response is heard on
      > >>> another channel? I thought I saw a "system hold time" option in Freescan but
      > >>> wasn't sure if this would work (it hasn't seemed to). Is there a trick to
      > >>> setting both the delay (for the channels) and the hold time (for the
      > >>> systems)? I'm guessing what's happening is System Hold says "scan for x
      > >>> seconds and move to another system," but does it also hold for that many
      > >>> seconds after a monitored channel's carrier has dropped and delay has
      > >>> expired?
      > >>>
      > >>>
      > >>>
      > >>> Any thoughts or advice would be appreciated.
      > >>>
      > >>>
      > >>>
      > >>> Thanks,
      > >>>
      > >>> Tony
      > >>>
      > >>>
      > >>>
      > >>> [Non-text portions of this message have been removed]
      > >>>
      > >>>
      > >>>
      > >>> ------------------------------------
      > >>>
      > >>> Yahoo! Groups Links
      > >>>
      > >>>
      > >>>
      > >>>
      > >>> ------------------------------------------------------------------------
      > >>>
      > >>>
      > >>> No virus found in this incoming message.
      > >>> Checked by AVG - www.avg.com
      > >>> Version: 9.0.929 / Virus Database: 271.1.1/4923 - Release Date: 04/08/12 14:34:00
      > >>>
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
    • Show all 9 messages in this topic