Loading ...
Sorry, an error occurred while loading the content.

6555Re: [BCD396XT] Re: Systems With Separate Base & Mobile Channels

Expand Messages
  • Uniden UPMan
    Apr 9 7:12 AM
    • 0 Attachment
      It is by design. Otherwise, it would be almost impossible to turn on/off channel groups in the intended system.


      UpMan
      UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before emailing me directly


      >________________________________
      > From: david40_33711 <david40@...>
      >To: BCD396XT@yahoogroups.com
      >Sent: Monday, April 9, 2012 8:36 AM
      >Subject: [BCD396XT] Re: Systems With Separate Base & Mobile Channels
      >
      >
      >

      >
      >You are correct. Don't know if that is an effect or deliberate as part of the design, but toggling the Function Mode On does have the effect of holding on whatever site, system, or search is active at that moment.
      >
      >--- In BCD396XT@yahoogroups.com, Uniden UPMan <uniden.upman@...> wrote:
      >>
      >> What Joe said was 100% correct. While what you say (after the first sentence) is also correct, it isn't what Joe said (and Joe's method is better).
      >>
      >>
      >> UpMan
      >> UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before emailing me directly
      >>
      >>
      >> >________________________________
      >> > From: david40_33711 <david40@...>
      >> >To: BCD396XT@yahoogroups.com
      >> >Sent: Monday, April 9, 2012 6:07 AM
      >> >Subject: [BCD396XT] Re: Systems With Separate Base & Mobile Channels
      >> >
      >> >
      >> >
      >> > 
      >> >
      >> >That's not true. Holding the Func Button locks or unlocks the Funtion Mode by toggling it on or off.
      >> >Holding on a system can be done by toggling the rest of the systems off, or assigning a system to a quick key.
      >> >
      >> >--- In BCD396XT@yahoogroups.com, MCH <mch@> wrote:
      >> >>
      >> >> If you hold the HOLD button, you will put the scanner into System
      >> >> Hold mode. To exit this mode, just hold the HOLD button again.
      >> >>
      >> >> Joe M.
      >> >>
      >> >> Tony Olivero wrote:
      >> >> > All:
      >> >> >
      >> >> >
      >> >> >
      >> >> > Our local state police are still using some low band channels with base
      >> >> > stations on one cfrequency and mobiles on another. An LTR system I
      >> >> > occasionally monitor exhibits similar behavior. Is it possible to get the
      >> >> > x96XT to hold on a system for a few seconds to see if a response is heard on
      >> >> > another channel? I thought I saw a "system hold time" option in Freescan but
      >> >> > wasn't sure if this would work (it hasn't seemed to). Is there a trick to
      >> >> > setting both the delay (for the channels) and the hold time (for the
      >> >> > systems)? I'm guessing what's happening is System Hold says "scan for x
      >> >> > seconds and move to another system," but does it also hold for that many
      >> >> > seconds after a monitored channel's carrier has dropped and delay has
      >> >> > expired?
      >> >> >
      >> >> >
      >> >> >
      >> >> > Any thoughts or advice would be appreciated.
      >> >> >
      >> >> >
      >> >> >
      >> >> > Thanks,
      >> >> >
      >> >> > Tony
      >> >> >
      >> >> >
      >> >> >
      >> >> > [Non-text portions of this message have been removed]
      >> >> >
      >> >> >
      >> >> >
      >> >> > ------------------------------------
      >> >> >
      >> >> > Yahoo! Groups Links
      >> >> >
      >> >> >
      >> >> >
      >> >> >
      >> >> > ----------------------------------------------------------
      >> >> >
      >> >> >
      >> >> > No virus found in this incoming message.
      >> >> > Checked by AVG - www.avg.com
      >> >> > Version: 9.0.929 / Virus Database: 271.1.1/4923 - Release Date: 04/08/12 14:34:00
      >> >> >
      >> >>
      >> >
      >> >
      >> >
      >> >
      >> >
      >>
      >> [Non-text portions of this message have been removed]
      >>
      >
      >
      >
      >
      >

      [Non-text portions of this message have been removed]
    • Show all 9 messages in this topic