6260RE: [BCD396XT] Quick keys for system/groups
- Feb 8, 2012there was a bit of a mistake message just sent out by me sorry about that. I
didn't realize it replied to the list lol.
It didn't have anything in the body, sorry about that.
From: BCD396XT@yahoogroups.com [mailto:BCD396XT@yahoogroups.com] On Behalf
Sent: Saturday, February 04, 2012 11:33 AM
Subject: Re: [BCD396XT] Quick keys for system/groups
Jerry Mader wrote:
> Sorry for not understanding this all the way, I can't comprehend too well.I could have explained it better, too.
> I apologize, but what I'm trying to do and maybe you could tell me how I'din
> do this for example is have 2 systems.
> A winter start up configuration and a summer one.
> With startup key 1, i would have all my winter systems that i listen too
> the winter on start up key one.and
> Then when i hit startup 2 all of those would be disabled and the summer
> config with the summer oriented systems and talk groups would be enabled
> the winter one would disappear until winter again.You have the concept down. That's exactly one way it could be used.
> But for this I'd need to upload 2 sets of the same systems right, can I doYou can do it with two uploads AS LONG AS you don't erase the scanner
> that or will it mess up the scanner?
contents when you upload the second set. You can also upload both at the
> Reason I'd need to do that is that set one would contain all of my winterup
> systems and some of them will be duplicates, such as police and fire and
> such. But then it would also add in the school buses, and plow trucks and
> stuff. With system two i wanted to be able to upload that one under start
> 2 and that one would have still the groups for the state police thingslike
> that as system one would have, but would turn on the parks, andrecreations,
> and sky warn repeaters and stuff like that.can't
> How would i do this so it would work the way I'd want it to do so? Or
> I do this at all?What you want to do is possible and would work very well. Just make sure
> Jerry Mader
your winter systems are assigned Start-Up Key 1 and your summer systems
are assigned Start-Up Key 2. You can upload them both at the same time.
Using them is simple. When you want to unlock your summer systems, hit 2
when the scanner is powering up. When you want to unlock your winter
systems, hit 1 when the scanner is powering up.
Any system not assigned a Start-Up Key will not be affected by the
reconfiguration, so you could have a THIRD system with your common
channels and assign that no Start-Up Key, and remove them from both of
the other systems.
Basically, the Start-Up keys are mass-lockout/unlock commands. Only the
systems assigned to the Start-Up key pressed will be unlocked, while ALL
OTHER systems assigned different Start-Up Keys will be locked out.
Funny how much easier it is to explain in the morning as opposed to 1 AM
at night. ;->
I'm assuming you have a large number of Systems that you want changed by
the Summer/Winter configuration. If not, it might be easier to use a
System Quick Key to enable or disable them. That way, you could easily
enable both of them if you like.
[Non-text portions of this message have been removed]
- << Previous post in topic Next post in topic >>