Loading ...
Sorry, an error occurred while loading the content.

6088Re: [BCD396XT] Re: No voice after a couple of weeks

Expand Messages
  • Clark Rennie
    Dec 8 3:16 PM
    • 0 Attachment
      All the Firmware update information is in the "Firmware" folder in the
      files section of this group.
      go here http://groups.yahoo.com/group/BCD396XT/


      At 12:52 PM 12/8/2011, you wrote:

      >I think thats one of the "bugs" that the most recent "firmware" upgrade
      >you will find on the Uniden Firmare Update list fixes where the scanner
      >stops receiving a P25 system....You need to go to maybe
      >www.marksscanners.com and see if he has that update or the files on here.....
      >--- In BCD396XT@yahoogroups.com, "Pat Johnson" <aniceaustinguy@...> wrote:
      > >
      > > I noticed my 396XT doing the same thing, as well, just recently
      > >
      > > --- In BCD396XT@yahoogroups.com, "boeing52au" <seven87@> wrote:
      > > >
      > > > Hi after about 2-3 weeks of 24/7 operation my 396xt stops producing
      > voice from a P25 site. The display shows it still ID searching/scanning
      > and the signal strength bar graph is active. When I press hold, the
      > 'engine' noise is there, so it looks like the RF side is working.
      > > >
      > > > A power off/on by button makes no difference. Only if I pull out the
      > power cord and the batteries (a total power down) will it produce voice again.
      > > >
      > > > Could this be some sort of memory leak issue with time?
      > > >
      > > > Any advice appreciated thanks..
    • Show all 6 messages in this topic