Loading ...
Sorry, an error occurred while loading the content.

5438Re: [BCD396XT] Re: Audio dropouts for trunk and conventional

Expand Messages
  • Paul Opitz
    May 9, 2011
      Correction, it will provide a voltage out (9V) at the beginning of the alert.




      ________________________________
      From: Paul Opitz <pmanu44@...>
      To: BCD396XT@yahoogroups.com
      Sent: Mon, May 9, 2011 4:19:41 PM
      Subject: Re: [BCD396XT] Re: Audio dropouts for trunk and conventional

       
      IIRC it provides a switch closure at the beginning of an alert (momentary).

      ________________________________
      From: MCH <mch@...>
      To: BCD396XT@yahoogroups.com
      Sent: Mon, May 9, 2011 4:10:00 PM
      Subject: Re: [BCD396XT] Re: Audio dropouts for trunk and conventional

       
      I'm sorry. I wasn't clear. I'm talking about the external trigger.

      Joe M.

      Paul Opitz wrote:
      > When in SAME standby, the audio path will open when a matching SAME is received
      >
      >
      > and will close when the end-of-message is received.
      >
      >
      >
      >
      > ________________________________
      > From: MCH <mch@...>
      > To: BCD396XT@yahoogroups.com
      > Sent: Mon, May 9, 2011 11:10:24 AM
      > Subject: Re: [BCD396XT] Re: Audio dropouts for trunk and conventional
      >
      >
      > Is the output active only during the alert message, or only during the
      > alert duration, or some other timeframe?
      >
      > Joe M.
      >
      > Uniden UPMan wrote:
      >> In my (admittedly biased) opinion, the BC370CRS is the best All Hazards radio


      >> on the market. In addition to full SAME support (including paying attention to
      >
      >
      >> the end-of-message signal), it will alert to All Hazards in areas without NOAA
      >
      >
      >> coverage, but with alerts going out on AM or FM Broadcast stations.
      >>
      >> It also supports external trigger (for hearing or sight impaired alerting).
      >> Plus, is a 300-channel conventional scanner with AM/FM broadcast coverage and


      >> Atomic Clock.
      >>
      >> Only one receiver, though.
      >>
      >> Which competitor has a better one?
      >>
      >> UPMan
      >>
      >> From: Jeffry Rehm <scanman1958@...>
      >>> To: BCD396XT@yahoogroups.com
      >>> Sent: Saturday, May 7, 2011 7:38 PM
      >>> Subject: Re: [BCD396XT] Re: Audio dropouts for trunk and conventional
      >>>
      >>>
      >>>
      >>> Well, I guess Uniden isn't going to make a WX/All Hazzards radio that is better
      >>>
      >>>
      >>> than the competitor.
      >>>
      >>> --- On Sat, 5/7/11, mch@... <mch@...> wrote:
      >>>
      >>> From: mch@... <mch@...>
      >>> Subject: Re: [BCD396XT] Re: Audio dropouts for trunk and conventional
      >>> To: BCD396XT@yahoogroups.com
      >>> Date: Saturday, May 7, 2011, 7:01 PM
      >>>
      >>>
      >>>
      >>> It was not 'corrected' - it was 'disabled'.
      >>>
      >>> If you have a second receiver, you don't have to put up with any dropouts
      >>> on the received signal while the receiver switches to the secondary
      function.
      >>>
      >>> This means WX Priority (the function that was disabled), Close Call, or
      >> channel
      >>> priority could be used with no gaps in the received signal. Additionally,
      > more
      >>> features such as true priority among any system type could be added.
      >>>
      >>> Close Call DND does help on the XT with the gaps, but CC is disabled
      whenever
      >>> a signal is received. Hence, it's not a true solution.
      >>>
      >>> Joe M.
      >>>
      >>> On Sat 07/05/11 7:49 PM , Clark Rennie c.rennie1@... sent:
      >>>> What does any of this have to do with "Audio dropouts" which the
      >>>> original poster stated was found and corrected
      >>>> by an option which was overlooked ?
      >>>>
      >>>> Clark
      >>>>
      >>>>
      >>>>
      >>>> At 04:25 PM 5/7/2011, you wrote:
      >>>>
      >>>>
      >>>>> It definitely could be done in firmware. The
      >>>> scanner has one VFO. Adding a >second one would only require another
      channel
      >>>> exactly like the one for the >first VFO, and a way to select it. You could
      >>>> simply have the keypad active >to select 10 VFOs when you are in VFO mode.
      I
      >>>> don't recall the Yupi all >that well, but I know the recent AOR offerings
      >>>> have two VFOs.>
      >>>>> Joe M.
      >>> [Non-text portions of this message have been removed]
      >>>
      >>>
      >>>
      >>>
      >>>
      >> [Non-text portions of this message have been removed]
      >>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >> ----------------------------------------------------------
      >>
      >>
      >> Internal Virus Database is out of date.
      >> Checked by AVG - www.avg.com
      >> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
      >> 03:33:00
      >>
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      > ----------------------------------------------------------
      >
      >
      > Internal Virus Database is out of date.
      > Checked by AVG - www.avg.com
      > Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
      >03:33:00
      >

      [Non-text portions of this message have been removed]




      [Non-text portions of this message have been removed]
    • Show all 30 messages in this topic