Loading ...
Sorry, an error occurred while loading the content.
Advanced Search
Author
Subject
Message
Special notice only

157 results from messages in BC346XT

Advanced Search
  • ...Any info on where I can purchase > the CB antenna for the scanner. > Thanks, > > Mike > > > > > On Mar 15, 2015, at 10:48 PM, MCH mch@^$2 > [BC346XT] > wrote: > >> What antenna are you using? The stock antenna is not very efficient at >> those frequencies...
    MCH Mar 15
  • What antenna are you using? The stock antenna is not very efficient at those frequencies, so the range will be limited. If you connect a CB antenna, the difference will be night and day. Joe M. On 3/16/2015 1:27 AM, mobileinstrumentnw@^$1 [BC346XT] wrote: > > > I cannot receive any CB transmissions on the scanner. Is it scanning the > incorrect frequency? > > thanks > > > > > > No...
    MCH Mar 15
  • When you first connected the adapter (without the scanner) did you load the drivers for it? If not, or if you connected both at the same time, Windows may have loaded the wring drivers. If you did, did you then connect the scanner cable and look in the windows device manager to see which port was assigned to the adapter and set the port setting in Freescan (although I think...
    MCH Sep 25, 2014
  • Fetching Sponsored Content...
  • ...Is the serial adapter someth I ng I can pick up at radio shack? Or does it have to come from uniden? On Sep 25, 2014 12:20 PM, "MCH mch@^$3 [BC346XT]" < BC346XT@^$4 > wrote: You have a few options: 1. A Uniden USB-1 adapter/cable. This is a programming cable...
    MCH Sep 25, 2014
  • You have a few options: 1. A Uniden USB-1 adapter/cable. This is a programming cable with the serial converter built-in. 2. A USB-serial converter. These are usually inexpensive. 3. A serial card for your PC. Of course, being a laptop you may or may not be able to add one. Joe M. On Sep 25, 2014, at 12:52 PM, "Michael Ostertag wsmwrr@^$1 [BC346XT]" < BC346XT@^$2 > wrote: I have...
    MCH Sep 25, 2014
  • All true. The CEC decided to regulate anything that charges batteries, and the removal of the charging circuit was the only real choice Uniden had. I have some links around somewhere, but they are not handy. You should be able to Google CEC CHARGING STANDARDS and find it. Joe M. On May 1, 2014, at 11:02 PM, "Mark W. Walton" < mark.walton@^$1 > wrote: On the subject of power: There...
    MCH May 2, 2014
  • Current (mA) doesn't have to match - it only needs to be at least what the 346 requires or higher. It's the voltage (V) that has to match. Joe M. On Apr 29, 2014, at 10:38 PM, < vvdesertguy@^$1 > wrote: Does anyone know of a good car adapter that will work for the BC346XT scanner? I had a power cord for the car but the MA was different than the specs of this scanner, the adapter...
    MCH Apr 29, 2014
  • Really odd. I know you said it was off, but check the control channel only setting again. Joe M. On Apr 28, 2014, at 6:24 PM, < vvdesertguy@^$1 > wrote: Thank you Joe, I just now tried it and still no hits. I tried auto, NFM and FM to no avail. The preprogrammed service band search works perfectly and picks up all the active frequencies but nothing for the custom search function...
    MCH Apr 28, 2014
  • Try fm rather than AUTO since your band plan may be set incorrectly. Joe M. On Apr 28, 2014, at 4:47 PM, < vvdesertguy@^$1 > wrote: For some reason when I created a custom search on 800mhz it doesn't seem to pick up anything while searching. I have c-ch off and all other settings on auto. If I stop the search using hold button and scroll manually through the frequencies, I can hear...
    MCH Apr 28, 2014
  • ...two lines > SO:------- > GRP------ > > Hope this helps you help me.. Thanks and sorry.. > > -----Original Message----- > From: MCH > Sent: Saturday, January 18, 2014 8:21 PM > To: BC346XT@^$1 > Subject: Re: [BC346XT] Selecting One Frequency Question > > Sounds...
    MCH Jan 18, 2014