Loading ...
Sorry, an error occurred while loading the content.

RE: [BC346XT] EDACS

Expand Messages
  • Mark W. Walton
    I uploaded that data from RR into my scanner. Mark Walton mark.walton@sympatico.ca ... From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf
    Message 1 of 9 , Mar 6, 2012
    • 0 Attachment
      I uploaded that data from RR into my scanner.

      Mark Walton
      mark.walton@...


      -----Original Message-----
      From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of MCH
      Sent: Tuesday, March 06, 2012 10:23 PM
      To: BC346XT@yahoogroups.com
      Subject: Re: [BC346XT] EDACS

      No. TalkGroups are something different, and are programmed after you have the system programming in place. If you programmed your scanner for an EDACS system, as soon as you enter the frequency it should prompt you for the LCN of that frequency. Again, RadioReference.com will show the LCN next to each frequency.

      Joe M.

      Mark W. Walton wrote:
      > In other words, talk groups, right? That's the term usually used in trunked systems.
      >
      > Mark Walton
      > mark.walton@...
      >
      > -----Original Message-----
      > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On
      > Behalf Of Paul Opitz
      > Sent: Tuesday, March 06, 2012 6:03 PM
      > To: BC346XT@yahoogroups.com
      > Subject: Re: [BC346XT] EDACS
      >
      > The logical channel number associated with the frequency. Usually, that is provided by the same source the frequencies came from.
      > ________________________________
      > From: Mark W. Walton <mark.walton@...>
      > To: BC346XT@yahoogroups.com
      > Sent: Tue, March 6, 2012 4:50:26 PM
      > Subject: RE: [BC346XT] EDACS
      >
      > LCN is...?
      >
      > Mark Walton
      > mark.walton@...
      >
      > -----Original Message-----
      > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On
      > Behalf Of Uniden UPMan
      > Sent: Tuesday, March 06, 2012 3:38 PM
      > To: BC346XT@yahoogroups.com
      > Subject: Re: [BC346XT] EDACS
      >
      > Every frequency must be entered and must be associated with its
      > corresponding LCN.
      >
      > UpMan
      > UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read
      > before emailing me directly ________________________________
      >> From: james <jamesjwalsh2001@...>
      >> To: BC346XT@yahoogroups.com
      >> Sent: Tuesday, March 6, 2012 2:10 PM
      >> Subject: [BC346XT] EDACS
      >>
      >> New to scanners.
      >>
      >> Successful setting up Motorola systems.
      >>
      >> Not so lucky with EDACS. Don't know what I'm doing wrong. Followed
      >> all the manual instructions. Is there some special info pertaining to
      >> this kind of system?
      >>
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      > ----------------------------------------------------------------------
      > --
      >
      >
      > No virus found in this incoming message.
      > Checked by AVG - www.avg.com
      > Version: 9.0.927 / Virus Database: 271.1.1/4255 - Release Date:
      > 03/06/12 14:34:00
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.