Loading ...
Sorry, an error occurred while loading the content.

RE: [BC346XT] EDACS

Expand Messages
  • Mark W. Walton
    In other words, talk groups, right? That s the term usually used in trunked systems. Mark Walton mark.walton@sympatico.ca ... From: BC346XT@yahoogroups.com
    Message 1 of 9 , Mar 6, 2012
    • 0 Attachment
      In other words, talk groups, right? That's the term usually used in trunked systems.

      Mark Walton
      mark.walton@...

      -----Original Message-----
      From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of Paul Opitz
      Sent: Tuesday, March 06, 2012 6:03 PM
      To: BC346XT@yahoogroups.com
      Subject: Re: [BC346XT] EDACS

      The logical channel number associated with the frequency. Usually, that is provided by the same source the frequencies came from.
      ________________________________
      From: Mark W. Walton <mark.walton@...>
      To: BC346XT@yahoogroups.com
      Sent: Tue, March 6, 2012 4:50:26 PM
      Subject: RE: [BC346XT] EDACS

      LCN is...?

      Mark Walton
      mark.walton@...

      -----Original Message-----
      From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
      Uniden UPMan
      Sent: Tuesday, March 06, 2012 3:38 PM
      To: BC346XT@yahoogroups.com
      Subject: Re: [BC346XT] EDACS

      Every frequency must be entered and must be associated with its corresponding
      LCN.

      UpMan
      UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before
      emailing me directly
      ________________________________
      > From: james <jamesjwalsh2001@...>
      >To: BC346XT@yahoogroups.com
      >Sent: Tuesday, March 6, 2012 2:10 PM
      >Subject: [BC346XT] EDACS
      >
      >New to scanners.
      >
      >Successful setting up Motorola systems.
      >
      >Not so lucky with EDACS. Don't know what I'm doing wrong. Followed
      >all the manual instructions. Is there some special info pertaining to
      >this kind of system?
      >
    • MCH
      No. TalkGroups are something different, and are programmed after you have the system programming in place. If you programmed your scanner for an EDACS system,
      Message 2 of 9 , Mar 6, 2012
      • 0 Attachment
        No. TalkGroups are something different, and are programmed after you
        have the system programming in place. If you programmed your scanner for
        an EDACS system, as soon as you enter the frequency it should prompt you
        for the LCN of that frequency. Again, RadioReference.com will show the
        LCN next to each frequency.

        Joe M.

        Mark W. Walton wrote:
        > In other words, talk groups, right? That's the term usually used in trunked systems.
        >
        > Mark Walton
        > mark.walton@...
        >
        > -----Original Message-----
        > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of Paul Opitz
        > Sent: Tuesday, March 06, 2012 6:03 PM
        > To: BC346XT@yahoogroups.com
        > Subject: Re: [BC346XT] EDACS
        >
        > The logical channel number associated with the frequency. Usually, that is provided by the same source the frequencies came from.
        > ________________________________
        > From: Mark W. Walton <mark.walton@...>
        > To: BC346XT@yahoogroups.com
        > Sent: Tue, March 6, 2012 4:50:26 PM
        > Subject: RE: [BC346XT] EDACS
        >
        > LCN is...?
        >
        > Mark Walton
        > mark.walton@...
        >
        > -----Original Message-----
        > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
        > Uniden UPMan
        > Sent: Tuesday, March 06, 2012 3:38 PM
        > To: BC346XT@yahoogroups.com
        > Subject: Re: [BC346XT] EDACS
        >
        > Every frequency must be entered and must be associated with its corresponding
        > LCN.
        >
        > UpMan
        > UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before
        > emailing me directly
        > ________________________________
        >> From: james <jamesjwalsh2001@...>
        >> To: BC346XT@yahoogroups.com
        >> Sent: Tuesday, March 6, 2012 2:10 PM
        >> Subject: [BC346XT] EDACS
        >>
        >> New to scanners.
        >>
        >> Successful setting up Motorola systems.
        >>
        >> Not so lucky with EDACS. Don't know what I'm doing wrong. Followed
        >> all the manual instructions. Is there some special info pertaining to
        >> this kind of system?
        >>
        >
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
        > ------------------------------------------------------------------------
        >
        >
        > No virus found in this incoming message.
        > Checked by AVG - www.avg.com
        > Version: 9.0.927 / Virus Database: 271.1.1/4255 - Release Date: 03/06/12 14:34:00
        >
      • Mark W. Walton
        I uploaded that data from RR into my scanner. Mark Walton mark.walton@sympatico.ca ... From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf
        Message 3 of 9 , Mar 6, 2012
        • 0 Attachment
          I uploaded that data from RR into my scanner.

          Mark Walton
          mark.walton@...


          -----Original Message-----
          From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of MCH
          Sent: Tuesday, March 06, 2012 10:23 PM
          To: BC346XT@yahoogroups.com
          Subject: Re: [BC346XT] EDACS

          No. TalkGroups are something different, and are programmed after you have the system programming in place. If you programmed your scanner for an EDACS system, as soon as you enter the frequency it should prompt you for the LCN of that frequency. Again, RadioReference.com will show the LCN next to each frequency.

          Joe M.

          Mark W. Walton wrote:
          > In other words, talk groups, right? That's the term usually used in trunked systems.
          >
          > Mark Walton
          > mark.walton@...
          >
          > -----Original Message-----
          > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On
          > Behalf Of Paul Opitz
          > Sent: Tuesday, March 06, 2012 6:03 PM
          > To: BC346XT@yahoogroups.com
          > Subject: Re: [BC346XT] EDACS
          >
          > The logical channel number associated with the frequency. Usually, that is provided by the same source the frequencies came from.
          > ________________________________
          > From: Mark W. Walton <mark.walton@...>
          > To: BC346XT@yahoogroups.com
          > Sent: Tue, March 6, 2012 4:50:26 PM
          > Subject: RE: [BC346XT] EDACS
          >
          > LCN is...?
          >
          > Mark Walton
          > mark.walton@...
          >
          > -----Original Message-----
          > From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On
          > Behalf Of Uniden UPMan
          > Sent: Tuesday, March 06, 2012 3:38 PM
          > To: BC346XT@yahoogroups.com
          > Subject: Re: [BC346XT] EDACS
          >
          > Every frequency must be entered and must be associated with its
          > corresponding LCN.
          >
          > UpMan
          > UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read
          > before emailing me directly ________________________________
          >> From: james <jamesjwalsh2001@...>
          >> To: BC346XT@yahoogroups.com
          >> Sent: Tuesday, March 6, 2012 2:10 PM
          >> Subject: [BC346XT] EDACS
          >>
          >> New to scanners.
          >>
          >> Successful setting up Motorola systems.
          >>
          >> Not so lucky with EDACS. Don't know what I'm doing wrong. Followed
          >> all the manual instructions. Is there some special info pertaining to
          >> this kind of system?
          >>
          >
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
          > ----------------------------------------------------------------------
          > --
          >
          >
          > No virus found in this incoming message.
          > Checked by AVG - www.avg.com
          > Version: 9.0.927 / Virus Database: 271.1.1/4255 - Release Date:
          > 03/06/12 14:34:00
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.