Re: [BC346XT] Tone-out alert sound
After reviewing my groups, I realized I had selected an alert tone for it.
--- On Sat, 2/5/11, MCH <mch@...> wrote:
From: MCH <mch@...>
Subject: Re: [BC346XT] Tone-out alert sound
Date: Saturday, February 5, 2011, 11:15 PM
The 346 has no dedicated "tone alert sound". It has a pallete of 10
tones that you can use for Tone Outs, Channel Alerts, and any other
alert the scanner makes. It sounds like you have an audio alert assigned
to one of your channels that is sounding when it becomes active. But,
there could be other causes, too. To help narrow it down, review all the
alert tone settings in your scanner, and change some to help determine
what kind of alert you are hearing.
The scanner cannot have an active FTO alert unless it's in the dedicated
FTO mode. It cannot alert on FTO while scanning.
> My scanner will occassionaly sound the alert tone on the priority channel when it is not set for the tone out feature.
> Any ideas what could be causing this?
> Thanks, Bob
> Yahoo! Groups Links
[Non-text portions of this message have been removed]