Loading ...
Sorry, an error occurred while loading the content.

940Re: [BC346XT] Selecting One Frequency Question

Expand Messages
  • MCH
    Jan 18, 2014
    • 0 Attachment
      You didn't provide enough info in your original post or this one, but
      what you are posting would be correct if you named your System "Group1".
      (which could be quite confusing)

      Joe M.

      Maggie OConnor wrote:
      > Yikes! So - I am assuming
      > System is my "Group1"
      > Group is my "Main"
      > and then Channel would be each individual Freq?
      >
      > If so - or if not so - how do I assign a number key?
      > I have the freq I want on "hold" right now (although this scanner sometimes
      > gets a mind of its own and un-holds!
      > It flashes between Group1 and Main, and under the freq it says NFM. Under
      > that are two lines
      > SO:-------
      > GRP------
      >
      > Hope this helps you help me.. Thanks and sorry..
      >
      > -----Original Message-----
      > From: MCH
      > Sent: Saturday, January 18, 2014 8:21 PM
      > To: BC346XT@yahoogroups.com
      > Subject: Re: [BC346XT] Selecting One Frequency Question
      >
      > Sounds like you want to use the Number Keys. Be sure to assign them for
      > the System, Group, and Channel, then just use SNK.GNK.CNK MENU and you
      > will go directly to that channel.
      >
      > Joe M.
      >
      > Maggie OConnor wrote:
      >>
      >> I have a Group1, then MAIN and MAIN2.
      >>
      >> MAIN has a bunch of individual, non-trunked frequencies I manually
      >> programmed into it. I would like to be able to manually do something so
      >> I can immediately be on “hold� on one of the frequencies in that MAIN
      >> set. (like the one for my town!)
      >>
      >> On the older scanners, each frequency I programmed had a number
      >> associated with it, so I would stop the scanner from scanning and then
      >> press the number I wanted and “hold� (or manual) and just “be� at that
      >> frequency.
      >>
      >> I also would love it if I could assign a frequency to be a “primary�
      >> frequency, also like the older scanners.
      >>
      >> Thanks for your help,
      >> - Maggie
      >>
      >>
      >>
      >>
      >>
      >> ------------------------------------------------------------------------
      >>
      >>
      >> No virus found in this incoming message.
      >> Checked by AVG - www.avg.com
      >> Version: 9.0.932 / Virus Database: 3681.1.1/6514 - Release Date: 01/18/14
      >> 14:19:00
      >>
      >
      >
      > ------------------------------------
      >
      > Yahoo Groups Links
      >
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo Groups Links
      >
      >
      >
      >
      > ------------------------------------------------------------------------
      >
      >
      > No virus found in this incoming message.
      > Checked by AVG - www.avg.com
      > Version: 9.0.932 / Virus Database: 3681.1.1/6514 - Release Date: 01/18/14 14:19:00
      >
    • Show all 15 messages in this topic