Loading ...
Sorry, an error occurred while loading the content.

665Re: [BC346XT] charging question

Expand Messages
  • Paul Opitz
    Oct 23 7:29 PM
    • 0 Attachment
      Further to the Moderator's note, 2 hours is not going to come even close to
      fully charging fully discharged batteries of any capacity. 2300 mAH batteries
      are going to take 14-16 hours.

      >From: Mark W. Walton <mark.walton@...>
      >To: BC346XT@yahoogroups.com
      >Sent: Sun, October 23, 2011 9:13:08 PM
      >Subject: RE: [BC346XT] charging question

      >MODERATOR'S NOTE:That only indicates that the charge timer has elapsed, not that
      >the batteries are fully charged.
      >When it's charging, "Normal Charging" appears on the display. When the display
      >blanks out, then the batteries should be fully charged. For my scanner, I have
      >the charge time set to 2 hours, that's ample for the supplied batteries (1800
      >mAh) and for some spares (2600 mAh).
      >Mark Walton
      >-----Original Message-----
      >From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of Paul
      >Sent: Sunday, October 23, 2011 10:05 PM
      >To: BC346XT@yahoogroups.com
      >Subject: Re: [BC346XT] charging question
      >There is no way to positively detect a full charge in the scanner other than
      >charging for the maximum duration.
      >>From: Karen <kpagnotti@...>
      >>To: BC346XT@yahoogroups.com
      >>Sent: Sun, October 23, 2011 8:48:58 PM
      >>Subject: [BC346XT] charging question
      >>How do you know when your scanner is charged when using the adapter?

      [Non-text portions of this message have been removed]
    • Show all 14 messages in this topic