- Sep 5, 2018I would put an extender/repeater on the cable. I believe the max is 50ft for RS232.On Sep 5, 2018, at 10:21 AM, avid@... [Avid-L2] <Avid-L2@yahoogroups.com> wrote:It’s about 75ft. It worked over a similar distance (with the same cables) previously.From: Avid-L2@yahoogroups.com <Avid-L2@yahoogroups.com>
Sent: Wednesday, September 5, 2018 10:11 AM
To: Paul Darrigo fedguy2@... [Avid-L2] <Avid-L2@yahoogroups.com>; avid@...
Subject: Re: [Avid-L2] Deck Control IssuesWhat’s the total distance for the 9pin?On Sep 4, 2018, at 6:21 PM, avid@... [Avid-L2] <Avid-L2@yahoogroups..com> wrote:Recently I helped a customer move their machine room and edit systems. It all went well, except for one system which will not do deck control – although it did before the move.
I’ve hooked up dozens of these over the years but I am stumped.
System is a Win7 HPz440 running Media Composer 8.4.something. I have tried 3 different USB to Serial adapters, 2 Rosetta Stone cables, temp cabling to the machine room and bypassing the machine control patch panel. I am also into a USB2 port since I have found they don’t work on USB3.
So probably not hardware.
On the software side I have uninstalled and reinstalled the Keyspan software, confirming it is the same version that other working systems are using. I have also confirmed the same firmware. I have tried various virtual ports, allocated in the Keyspan software.
Any thoughts, suggestions, ideas appreciated.
- Dave
(971) 267-7661
- << Previous post in topic Next post in topic >>
Attention: Starting December 14, 2019 Yahoo Groups will no longer host user created content on its sites. New content can no longer be uploaded after October 28, 2019. Sending/Receiving email functionality is not going away, you can continue to communicate via any email client with your group members. Learn More