Loading ...
Sorry, an error occurred while loading the content.
  • Back
  • About Group

  • Join Group
, added in the last 7 days
New MessagesSee All
  • Re: Russel R

    Thanks David, I did the same as you and moved on to the next step. Grant From: on behalf of "David Calloway

    7 hours ago
  • Re: Russel R

    Alan and David, thanks for the replies. Alan, I followed your progress on SOS and was impressed by your builds. The problem I had was with the offsets on

    7 hours ago
  • Re: Russel R

    Are you talking about the transom or where the outboard goes. If it's where the out board goes you have to design that too fit your motor. I built three of

    mooseboat2 1 day ago
Fetching Sponsored Content...

Group Description

From the time William Atkin left a budding career in civil engineering to take up boatbuilding and designing in 1906, until his son John's death in 1999, the Atkin drawing boards spawned over 900 designs. This group is for the discussion of those designs and the boats built from them.

The current Atkin plan catalog is online at: http://www.atkinboatplans.com/

If you set out to build an Atkin boat, please do not modify the plans. If you stray from the plans you do so at your own risk and Atkin & Co. will take no responsibility for the performance of the resulting boat.

Group Information

Group Settings

  • This is a public group.
  • Attachments are permitted.
  • Members cannot hide email address.
  • Listed in Yahoo Groups directory.
  • Membership does not require approval.
  • Messages from new members require approval.
  • All members can post messages.

Message History