Re: The Adhesive Quest
Try Spruce and specialty…..
A Resorcinol Formaldehyde Adhesive capable of curing at room temperature and providing strong, durable, waterproof bonds. Comes in two parts, a liquid resin (part A) and a powered catalyst (part B). the liquid resin is an alcohol-water solution of a partially condensed resorcinol-formaldehyde resin containing a suitable reinforcing cellulosic filler. The hardener is a tan powder formulated from paraformaldehyde and a suitable cellulosic filler.
Produces a cured glue line which is resistant to fresh water or salt water, most acids and organic solvents, and lubricating oils and greases. Being thermoset, the bond is resistant to elevated temps. and conversely, no loss in bond strength occurs at temperatures as low as 40°F. These features make it advantageous for use as a general marine and aircraft use. It provides strong bonds between many wood and non-wood surfaces. These include treated woods, many plastics, natural and synthetic rubber, primed metal, leather, textiles, paper and fiber boards.
CASCOPHEN RESOURCINAL ADH PT
CASCOPHEN RESOURCINAL ADH QT
CASCOPHEN RESOURCINAL ADH GAL
This transmission is not a digital or electronic signature and cannot be used to form, document, or authenticate a contract. Hilton and its affiliates accept no liability arising in connection with this transmission. © 2011 Hilton Worldwide Proprietary and Confidential
- Personaly I would use a epoxy glue of the glue not laminating type. it will have time restraints but will not keep getting harder over the years. Like kitchen chairs weldwood type glues fail with tine when strained.