Loading ...
Sorry, an error occurred while loading the content.

Re: How many Goat projects are happening in Australia ? Gold Coast ?

Expand Messages
  • Phils
    This little drill guide has a lot more to offer, as you will find outif you get one . What I did with mine is I took a keyless chuck off a used up drill and
    Message 1 of 17 , Oct 2, 2011
    • 0 Attachment
      This little drill guide has a lot more to offer, as you will find outif you get one . What I did with mine is I took a keyless chuck off a used up drill and put it on my drill guide. They may make them now with a keyless chuck ...? I bought mine 10 years ago , still going strong . 8)

      --- In Airchairgroup@yahoogroups.com, "flying.penguin711" <hmaroske@...> wrote:
      >
      > Hi Phil,
      >
      > >My biggest struggle right now is getting my holes in the tubing drilled correctly. I can't seem to drill on the correct angles.
      >
      > I have also frustrated myself with this until I found I could drill the pilot hole with the smallest bit that fits in the drill (0.8mm). Considering the size of the AN4 bolts that gives you a _lot_ of chance for correction until the final drill size goes in. Even then I chose the thinnest bolt I could find and drilled for that (3mm) until everything actually fitted. Only then I enlarged the holes to AN3 or even AN4 bolt diameter.
      >
      > With the GOAT that saved me some frustration. But in the end it does not matter too much, the camera pics normally do not show that kind of detail :-)
      >
      > Cheers
      > Hendrik
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.