Loading ...
Sorry, an error occurred while loading the content.
 

RE: [Airchairgroup] Ribs Length of the Goat 2

Expand Messages
  • David Mercer
    _____ From: Airchairgroup@yahoogroups.com [mailto:Airchairgroup@yahoogroups.com] On Behalf Of Alaa Fahmy Sent: Thursday, October 01, 2009 12:12 AM To:
    Message 1 of 3 , Oct 1 2:26 PM

       

       


      From: Airchairgroup@yahoogroups.com [mailto: Airchairgroup@yahoogroups.com ] On Behalf Of Alaa Fahmy
      Sent: Thursday, October 01, 2009 12:12 AM
      To: Airchairgroup@yahoogroups.com
      Subject: [Airchairgroup] Ribs Length of the Goat 2

       

       

      On G2W1 the struts length is mentioned as 41" long.
      This means that the wing breadth is around 43" wide.

      On G2S8 the rib contour specifies that the rib length would be 44.5" long (the last point to the right is 44.5,0)
      This means that the horizontal distance from the first point to the last point of the rib should be 44.5" long.

      Is this assumption correct?
      If so, this means that the rib will be longer than the wing breadth, which is around 43" long.

      Did I miss something?

      Thanks

      Alaa

      Ribs are curved to make airfoil shape so would be longer than chord (wing width front to back).

      DaveM

      Miami,OK

    • Alaa Fahmy
      I think I found out the discrepancy. In G2S7, the instruction say: ovalize end and trim Thanks ________________________________ From: David Mercer
      Message 2 of 3 , Oct 3 12:45 AM
        I think I found out the discrepancy. In G2S7, the instruction say: ovalize end and trim

        Thanks


        From: David Mercer <drmercer@...>
        To: Airchairgroup@yahoogroups.com
        Sent: Friday, October 2, 2009 1:26:03 AM
        Subject: RE: [Airchairgroup] Ribs Length of the Goat 2

         

         

         


        From: Airchairgroup@ yahoogroups. com [mailto: Airchairgroup@ yahoogroups. com ] On Behalf Of Alaa Fahmy
        Sent: Thursday, October 01, 2009 12:12 AM
        To: Airchairgroup@ yahoogroups. com
        Subject: [Airchairgroup] Ribs Length of the Goat 2

         

         

        On G2W1 the struts length is mentioned as 41" long.
        This means that the wing breadth is around 43" wide.

        On G2S8 the rib contour specifies that the rib length would be 44.5" long (the last point to the right is 44.5,0)
        This means that the horizontal distance from the first point to the last point of the rib should be 44.5" long.

        Is this assumption correct?
        If so, this means that the rib will be longer than the wing breadth, which is around 43" long.

        Did I miss something?

        Thanks

        Alaa

        Ribs are curved to make airfoil shape so would be longer than chord (wing width front to back).

        DaveM

        Miami,OK


      Your message has been successfully submitted and would be delivered to recipients shortly.