Re: MSP430 for the ATS-4B
- I don't have an ATS-4B, but you can almost read the print
on the MSP430 shown on page 11 of the ATS-4B manual.
Looks like "M430F1232". The pin spacing is the same as the
74AC02, so it's the 28 pin DW package. My MTR has the
smaller 28 pin PW package, same pin spacing as the ADS9834.
I couldn't find an MSP430F1231 mentioned on the TI website.
Check out pages 2,3,47,51 of the TI MSP430F1232 data sheet:
My guess is you want the MSP430F1232IDW, and that the
missing "I" simply indicates Industrial temperature range.
As opposed to the wimpier Commercial temperature range
which is not available on this part.
Good luck programming it. I think you will need the old
parallel port programmer, and that USB to parallel adapters
--- In AT_Sprint@yahoogroups.com, "ab6wl" <ecraig@...> wrote:
> Hello All,
> parts list ... for the ATS-4B indicates an MSP430F1232DW. The schematic shows an MSP430F1231.