Loading ...
Sorry, an error occurred while loading the content.
 

Re: [AQ_NFS] Re: Font stuck in oversize

Expand Messages
  • Cleadie B
    Thanks for responding. I opened Gaylon s message first, so you can check my reply to him. What I had done was adjust the resolution, and everything is working
    Message 1 of 7 , Nov 16, 2011
      Thanks for responding. I opened Gaylon's message first, so you can check my reply to him. What I had done was adjust the resolution, and everything is working well. So your advice was right on the mark.

      Cleadie B



      ________________________________
      From: Gunilla Manell <gmanell@...>
      To: AQ_NFS@yahoogroups.com
      Sent: Wednesday, November 16, 2011 2:57:37 PM
      Subject: RE: [AQ_NFS] Re: Font stuck in oversize


       
      Is it possible to change the resolution on your monitor screen, so the windows appear smaller and you can maybe see those buttons you need?

      /Gunilla

      From: AQ_NFS@yahoogroups.com [mailto:AQ_NFS@yahoogroups.com] On Behalf Of Cleadie B
      Sent: Wednesday, November 16, 2011 10:53 AM
      To: AQ_NFS@yahoogroups.com
      Subject: Re: [AQ_NFS] Re: Font stuck in oversize

      Thanks for replying. Unfortunately, I can get into Preferences, and reset the fonts, but cannot see the button to save the changes. The screen will not show the top nor bottom of the pages in Preferences. Once I am in Preferences I have to do an Alt-Ctr-Delete to get out of it.

      What I think I will need is to clear the settings in the program files. The delete via Windows menu in the control panel did not do it.

      Again, thanks. Cleadie B.

      ________________________________
      From: Bob Penry <bob.penry@... <mailto:bob.penry%40thepenry.net> >
      To: AQ_NFS@yahoogroups.com <mailto:AQ_NFS%40yahoogroups.com>
      Sent: Wednesday, November 16, 2011 12:43:38 PM
      Subject: [AQ_NFS] Re: Font stuck in oversize

      Try this: Go to tools preferences fonts, and select the reset font button.

      If you can’t see the Tools menu then press Alt T, then P which will bring up the Preferences screen, then choose Fonts from the Tabs, and reset.

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]




      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.