ADuC7026 & OpenOCD
- Plenty of questions asking about an OpenOCD config for the ADuC family
but no answers. Has anybody here managed to configure OpenOCD properly?
I cannot flash, but can debug with the following:
ft2232_device_desc "Amontec JTAGkey"
ft2232_vid_pid 0x0403 0xcff8
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little 0
#target_script 0 reset h2294_init.script
working_area 0 0x40000000 0x40000 nobackup
flash bank cfi 0x00080000 0xf7ff 2 2 0
- --- In ADuC_ARM@yahoogroups.com, "martin_schoenegg"
>Thank you for your help, but I do not understand what you mean.
> > Plenty of questions asking about an OpenOCD config for the ADuC
> > but no answers. Has anybody here managed to configure OpenOCD
> Sure have a look at Tilos Update today
What is Tilos update?
- --- In ADuC_ARM@yahoogroups.com, "billiumbuck" <billiumbuck@...>
> Thank you for your help, but I do not understand what you mean.What's about looking a bit for past topics?
> What is Tilos update?
there you will find all ou search for.