Loading ...
Sorry, an error occurred while loading the content.

Re: [7mm NGA] Re: Extended Peco Coaches

Expand Messages
  • TonyW
    Thanks James – a good idea! I am also building some short 4-wheel coaches with some card bodies I re-scaled from 16mm and will also need some roofs for them
    Message 1 of 9 , May 16, 2013
    • 0 Attachment
      Thanks James – a good idea! I am also building some short 4-wheel coaches with some card bodies I re-scaled from 16mm and will also need some roofs for them too, even if these extended coaches don’t work out.

      Regards,

      Tony.


      From: James C
      Sent: Thursday, May 16, 2013 9:34 AM
      To: 7mmnga@yahoogroups.com
      Subject: [7mm NGA] Re: Extended Peco Coaches


      Dear Tony,
      I am suprised that Howard (if you look back 2 or 3 AGMS you will see examples of Howard´s coach work) hasnot mentioned his best tip. Use 4.5 cm,s venetian blind slats for roofs.
      best wishes,
      James Corsi

      --- In mailto:7mmnga%40yahoogroups.com, "TonyW" <tony.wells@...> wrote:
      >
      > Thanks Howard, but I’ve not seen any Peco end panels, only sides, glazing and chasses. Would I therefore have to make those from such as Plastikard or even laminate suitable ends from my card coaches?
      >
      > Regards,
      >
      > Tony.
      >
      >
      > From: Howard Clarke
      > Sent: Tuesday, May 14, 2013 1:00 PM
      > To: mailto:7mmnga%40yahoogroups.com
      > Subject: Re: [7mm NGA] Extended Peco Coaches
      >
      >
      > Hi Tony
      > If you want to make coaches using the Peco parts use the individual coach side parts.
      > They make much better narrow gauge coaches far better than adding the 4-wheel sides together.
      > Regards
      > Howard 215
      > ----- Original Message -----
      > From: TonyW
      > To: mailto:7mmnga%40yahoogroups.com
      > Sent: Monday, May 13, 2013 11:04 PM
      > Subject: [7mm NGA] Extended Peco Coaches
      >
      > Yet another question please - whilst looking through old back issues of
      > Narrow Lines, I keep seeing reference to a conversion kit to join two Peco
      > coach bodies together, apparently only sold by the Association though. Is
      > this / was this the case, and as they are no longer listed in the
      > Association's Sales does this mean that they are no longer available, or is
      > there another supplier please? If there isn't, will I have to build my own
      > chasses from scratch instead?
      >
      > Thank you,
      >
      > Tony Wells.
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >





      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.