Loading ...
Sorry, an error occurred while loading the content.

Topics List

Top pulley on Craftex 4x6 saw

(6)
Thanks for your help, and I've found a big part of my problem: one of the bolts holding the saw casting to the base (pivot bolt) had loosened almost to the
reg.craft
6
posts
May 3

Can't see how to remove drive wheel

(22)
Appsmangler, You probably noticed, but my saw looks like yours - it also has the same cutouts on the wheels, etc. After loosening that short black bolt on the
appsmangler
22
posts
Apr 28

Dayton 3z360

(15)
John, You were right, it turned out that the casting just has a straight hole for the bearing and drive axle. It's not like the hole for the pulley-bearing. So
wbzx2
15
posts
Apr 27

New type of 4x6?

(7)
I think it looks far more like the geared head 7x12 from Grizzly. http://www.grizzly.com/products/7-x-12-Geared-Head-Metal-Cutting-Bandsaw/G9743 including the
John Vreede
7
posts
Apr 24

Fix for Yahoo photo jump.

(3)
me to bill I just stumbled on it today and I know it has come up on a few of the groups I belong to so I passed it along. Mark
markknx
3
posts
Mar 27

Bandsaw adjustments and tuning

(6)
Hi Ski Wouldn't worry about not being able to access the circlip groove, mine has only ever had a drive key with a set screw bearing on top of it, to hold it.
c_ryskoski
6
posts
Mar 24

Bandsaw repaired.

(7)
Hi tailstock Check out the reply I made to Len as same things apply to your saw, albeit his has different adjustments from yours. In particular, since its
tailstock2003
7
posts
Mar 24

Ring roller

(6)
I have the same ring roller, I believe mine came from Harbor Freight, I've had it at least 10 or 15 years, the largest ring I've made has been about 18 inches.
reg.craft
6
posts
Mar 18

Hydraulic damping

(7)
1) The valve is metered out only and uncontrolled in the opposite direction. I think that means it bypasses the flow control in the reverse direction. If you
yet_another_dan
7
posts
Mar 13

sister group 4x6bandsawpics

(12)
Ken, Heh heh heh. It's certainly the only redeeming one that I have found! Actually, today was the first time I had heard of a 4X6 Pics Group, either. But I
c_ryskoski
12
posts
Mar 10

Re: 4x6 bandsaw hydraulic downfeed cylinder addition not working...

(7)
Clever Mike! All in the piston! I saved the drawings….may come in handy some time! J Bill From: 4x6bandsaw@yahoogroups.com
wa5cab
7
posts
Mar 1

4x6 bandsaw hydraulic downfeed cylinder addition not working properl

(39)
Not familiar with nak55, so I looked it up. Pre-hardened, 40Rc…..tough stuff. That’s a bit more than a bi-metal blade, including aM42, is going to want to
auswelder
39
posts
Mar 1

New file uploaded to 4x6bandsaw

(27)
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the 4x6bandsaw group. File : /Down-feed
4x6bandsaw@yahoogroups.com
27
posts
Feb 28

Re: 4x6 bandsaw hydraulic downfeed cylinder addition not working pro

(17)
Hi Jim, I’ve spent kazillions of hours designing & drawing hydraulic systems. Between that, and reading ISO drawings to troubleshoot ‘em….I have a lot
chris vuxton
17
posts
Feb 28

FW: [4x6bandsaw] Re: 4x6 bandsaw hydraulic downfeed cylinder additio

(2)
8X 10.... Andy Wander _____ From: 4x6bandsaw@yahoogroups.com [mailto:4x6bandsaw@yahoogroups.com] Sent: Friday, February 27, 2015 7:05 PM To:
Bill
2
posts
Feb 27
View First Topic Go to View Last Topic
Loading 1 - 15 of total 1,998 topics