Loading ...
Sorry, an error occurred while loading the content.

Re: [30MDG] error log

Expand Messages
  • signal
    Hi Laurie, Thanks for your help Laurie. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
    Message 1 of 13 , Jul 28 5:11 AM
    • 0 Attachment
      Hi Laurie,

      Thanks for your help Laurie.

      73 Eddy N4ABN


      On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
       

      OK Eddy,
      I have forwarded this email thread to the U30 developer, John OE3JPK
      I wont publish his email address here, but it is listed on the U30 page
      http://www.u30.hf-core.at/ just above the flags counter

      Regards
      Laurie VK3AMA

      On 28/07/2012 5:21 PM, signal wrote:
      >
      >
      > Laurie,
      >
      > Yes I looked and I believe it's logged correct. This is a partial of
      > the log below...
      >
      > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
      > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
      > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
      > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
      > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
      > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
      > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
      > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
      > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
      > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
      > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
      > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
      > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
      > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
      > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
      > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
      >
      >
      > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
      >>
      >> Eddy,
      >>
      >> Have you confirmed that the correct code is in the adif file?
      >>
      >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
      >> haven't seen any evidence of it modifying the adif.
      >>
      >> If the correct code is in your adif, and U30 is reporting the dxcc code
      >> as 0 then that will need to be taken up with the author of U30. I could
      >> forward the email to him if it is clear that your adif file has the
      >> correct code and U30 is reporting otherwise.
      >>
      >> BTW the adif tag will be <DXCC:3>516
      >>
      >> Laurie, VK3AMA
      >>
      >> On 28/07/2012 5:01 PM, signal wrote:
      >> >
      >> >
      >> > Hi Laurie,
      >> >
      >> > I opened the log to see what it is logged for the DXCC code and that's
      >> > what it shows (516) but when it's imported into U30 it's changed and
      >> > gets reported as an error. Can I correct the problem some how or is
      >> > that not supposed to be done by me?
      >> >
      >> > 73 Eddy N4ABN
      >> >
      >> >
      >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
      >> >>
      >> >> Eddy,
      >> >>
      >> >> I put TO2D into DXKeeper and it comes back as 516
      >> >>
      >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
      >> as 516
      >> >> See it here...
      >> >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
      >> >>
      >> >> de Laurie, VK3AMA
      >> >>
      >> >> On 28/07/2012 4:41 PM, signal wrote:
      >> >> >
      >> >> >
      >> >> > Hi Laurie,
      >> >> >
      >> >> > I can't find what the DXCC country code should be. Do you know
      >> where I
      >> >> > can find it on the internet?
      >> >> >
      >> >> > 73 Eddy N4ABN
      >> >> >
      >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
      >> >> >>
      >> >> >> Eddy,
      >> >> >>
      >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
      >> indicates an
      >> >> >> invalid dxcc country code. Looks like there is no dxcc set in your
      >> >> >> logger, so the adif export tagged the dxcc as 0.
      >> >> >>
      >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
      >> >> try an
      >> >> >> export again I think it should work.
      >> >> >>
      >> >> >> Regards
      >> >> >> Laurie, VK3AMA
      >> >> >>
      >> >> >> On 28/07/2012 2:25 PM, signal wrote:
      >> >> >> >
      >> >> >> >
      >> >> >> > I had a qso with a station TO2D today. He was on an island
      >> >> dxpedition.
      >> >> >> > Saint Barthelemy DXpedition 2012
      >> >> >> > HB9EOU, HB9CVC
      >> >> >> >
      >> >> >> > St. Barthelemy
      >> >> >> >
      >> >> >> > The U30 is not accepting it. The error message is below. How do
      >> >> I get
      >> >> >> > the program to recognize the qso?
      >> >> >> >
      >> >> >> >
      >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
      >> >> >> >
      >> >> >> > ERROR: >>>
      >> >> >> >
      >> >> >>
      >> >>
      >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
      >>
      >> >>
      >> >> >>
      >> >> >> > <EOR>
      >> >> >> >
      >> >> >> >
      >> >> >> > 73 Eddy N4ABN
      >> >> >> >
      >> >> >> >
      >> >> >> >
      >> >> >> >
      >> >> >>
      >> >> >
      >> >>
      >>


      -- 
      If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
      
      https://sites.google.com/site/n4abnradio/
    • dl6xaz
      Hi Eddy and Laurie, just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This
      Message 2 of 13 , Jul 28 11:59 AM
      • 0 Attachment
        Hi Eddy and Laurie,
        just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
        vy73 Fred DL6XAZ


        --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
        >
        > Hi Laurie,
        >
        > Thanks for your help Laurie.
        >
        > 73 Eddy N4ABN
        >
        >
        > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
        > >
        > > OK Eddy,
        > > I have forwarded this email thread to the U30 developer, John OE3JPK
        > > I wont publish his email address here, but it is listed on the U30 page
        > > http://www.u30.hf-core.at/ just above the flags counter
        > >
        > > Regards
        > > Laurie VK3AMA
        > >
        > > On 28/07/2012 5:21 PM, signal wrote:
        > > >
        > > >
        > > > Laurie,
        > > >
        > > > Yes I looked and I believe it's logged correct. This is a partial of
        > > > the log below...
        > > >
        > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
        > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
        > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
        > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
        > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
        > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
        > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
        > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
        > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
        > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
        > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
        > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
        > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
        > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
        > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
        > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
        > > >
        > > >
        > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
        > > >>
        > > >> Eddy,
        > > >>
        > > >> Have you confirmed that the correct code is in the adif file?
        > > >>
        > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
        > > >> haven't seen any evidence of it modifying the adif.
        > > >>
        > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
        > > >> as 0 then that will need to be taken up with the author of U30. I could
        > > >> forward the email to him if it is clear that your adif file has the
        > > >> correct code and U30 is reporting otherwise.
        > > >>
        > > >> BTW the adif tag will be <DXCC:3>516
        > > >>
        > > >> Laurie, VK3AMA
        > > >>
        > > >> On 28/07/2012 5:01 PM, signal wrote:
        > > >> >
        > > >> >
        > > >> > Hi Laurie,
        > > >> >
        > > >> > I opened the log to see what it is logged for the DXCC code and
        > > that's
        > > >> > what it shows (516) but when it's imported into U30 it's changed and
        > > >> > gets reported as an error. Can I correct the problem some how or is
        > > >> > that not supposed to be done by me?
        > > >> >
        > > >> > 73 Eddy N4ABN
        > > >> >
        > > >> >
        > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
        > > >> >>
        > > >> >> Eddy,
        > > >> >>
        > > >> >> I put TO2D into DXKeeper and it comes back as 516
        > > >> >>
        > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
        > > >> as 516
        > > >> >> See it here...
        > > >> >>
        > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
        > > >> >>
        > > >> >> de Laurie, VK3AMA
        > > >> >>
        > > >> >> On 28/07/2012 4:41 PM, signal wrote:
        > > >> >> >
        > > >> >> >
        > > >> >> > Hi Laurie,
        > > >> >> >
        > > >> >> > I can't find what the DXCC country code should be. Do you know
        > > >> where I
        > > >> >> > can find it on the internet?
        > > >> >> >
        > > >> >> > 73 Eddy N4ABN
        > > >> >> >
        > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
        > > >> >> >>
        > > >> >> >> Eddy,
        > > >> >> >>
        > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
        > > >> indicates an
        > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
        > > your
        > > >> >> >> logger, so the adif export tagged the dxcc as 0.
        > > >> >> >>
        > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
        > > >> >> try an
        > > >> >> >> export again I think it should work.
        > > >> >> >>
        > > >> >> >> Regards
        > > >> >> >> Laurie, VK3AMA
        > > >> >> >>
        > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >> > I had a qso with a station TO2D today. He was on an island
        > > >> >> dxpedition.
        > > >> >> >> > Saint Barthelemy DXpedition 2012
        > > >> >> >> > HB9EOU, HB9CVC
        > > >> >> >> >
        > > >> >> >> > St. Barthelemy
        > > >> >> >> >
        > > >> >> >> > The U30 is not accepting it. The error message is below. How do
        > > >> >> I get
        > > >> >> >> > the program to recognize the qso?
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
        > > >> >> >> >
        > > >> >> >> > ERROR: >>>
        > > >> >> >> >
        > > >> >> >>
        > > >> >>
        > > >>
        > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
        > >
        > > >>
        > > >> >>
        > > >> >> >>
        > > >> >> >> > <EOR>
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >> > 73 Eddy N4ABN
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >> >
        > > >> >> >>
        > > >> >> >
        > > >> >>
        > > >>
        > >
        > >
        >
        > --
        > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
        >
        > https://sites.google.com/site/n4abnradio/
        >
      • signal
        Hi Fred, I don t know how many other members have had qso s with TO2D but they are going to be there till next month sometime. 73 Eddy N4ABN ... -- If you do
        Message 3 of 13 , Jul 28 12:02 PM
        • 0 Attachment
          Hi Fred,

          I don't know how many other members have had qso's with TO2D but they are going to be there till next month sometime.

          73 Eddy N4ABN


          On 7/28/2012 2:59 PM, dl6xaz wrote:
           

          Hi Eddy and Laurie,
          just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
          vy73 Fred DL6XAZ

          --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
          >
          > Hi Laurie,
          >
          > Thanks for your help Laurie.
          >
          > 73 Eddy N4ABN
          >
          >
          > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
          > >
          > > OK Eddy,
          > > I have forwarded this email thread to the U30 developer, John OE3JPK
          > > I wont publish his email address here, but it is listed on the U30 page
          > > http://www.u30.hf-core.at/ just above the flags counter
          > >
          > > Regards
          > > Laurie VK3AMA
          > >
          > > On 28/07/2012 5:21 PM, signal wrote:
          > > >
          > > >
          > > > Laurie,
          > > >
          > > > Yes I looked and I believe it's logged correct. This is a partial of
          > > > the log below...
          > > >
          > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
          > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
          > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
          > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
          > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
          > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
          > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
          > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
          > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
          > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
          > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
          > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
          > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
          > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
          > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
          > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
          > > >
          > > >
          > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
          > > >>
          > > >> Eddy,
          > > >>
          > > >> Have you confirmed that the correct code is in the adif file?
          > > >>
          > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
          > > >> haven't seen any evidence of it modifying the adif.
          > > >>
          > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
          > > >> as 0 then that will need to be taken up with the author of U30. I could
          > > >> forward the email to him if it is clear that your adif file has the
          > > >> correct code and U30 is reporting otherwise.
          > > >>
          > > >> BTW the adif tag will be <DXCC:3>516
          > > >>
          > > >> Laurie, VK3AMA
          > > >>
          > > >> On 28/07/2012 5:01 PM, signal wrote:
          > > >> >
          > > >> >
          > > >> > Hi Laurie,
          > > >> >
          > > >> > I opened the log to see what it is logged for the DXCC code and
          > > that's
          > > >> > what it shows (516) but when it's imported into U30 it's changed and
          > > >> > gets reported as an error. Can I correct the problem some how or is
          > > >> > that not supposed to be done by me?
          > > >> >
          > > >> > 73 Eddy N4ABN
          > > >> >
          > > >> >
          > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
          > > >> >>
          > > >> >> Eddy,
          > > >> >>
          > > >> >> I put TO2D into DXKeeper and it comes back as 516
          > > >> >>
          > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
          > > >> as 516
          > > >> >> See it here...
          > > >> >>
          > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
          > > >> >>
          > > >> >> de Laurie, VK3AMA
          > > >> >>
          > > >> >> On 28/07/2012 4:41 PM, signal wrote:
          > > >> >> >
          > > >> >> >
          > > >> >> > Hi Laurie,
          > > >> >> >
          > > >> >> > I can't find what the DXCC country code should be. Do you know
          > > >> where I
          > > >> >> > can find it on the internet?
          > > >> >> >
          > > >> >> > 73 Eddy N4ABN
          > > >> >> >
          > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
          > > >> >> >>
          > > >> >> >> Eddy,
          > > >> >> >>
          > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
          > > >> indicates an
          > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
          > > your
          > > >> >> >> logger, so the adif export tagged the dxcc as 0.
          > > >> >> >>
          > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
          > > >> >> try an
          > > >> >> >> export again I think it should work.
          > > >> >> >>
          > > >> >> >> Regards
          > > >> >> >> Laurie, VK3AMA
          > > >> >> >>
          > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >> > I had a qso with a station TO2D today. He was on an island
          > > >> >> dxpedition.
          > > >> >> >> > Saint Barthelemy DXpedition 2012
          > > >> >> >> > HB9EOU, HB9CVC
          > > >> >> >> >
          > > >> >> >> > St. Barthelemy
          > > >> >> >> >
          > > >> >> >> > The U30 is not accepting it. The error message is below. How do
          > > >> >> I get
          > > >> >> >> > the program to recognize the qso?
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
          > > >> >> >> >
          > > >> >> >> > ERROR: >>>
          > > >> >> >> >
          > > >> >> >>
          > > >> >>
          > > >>
          > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
          > >
          > > >>
          > > >> >>
          > > >> >> >>
          > > >> >> >> > <EOR>
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >> > 73 Eddy N4ABN
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >> >
          > > >> >> >>
          > > >> >> >
          > > >> >>
          > > >>
          > >
          > >
          >
          > --
          > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
          >
          > https://sites.google.com/site/n4abnradio/
          >


          -- 
          If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
          
          https://sites.google.com/site/n4abnradio/
        • Laurie, VK3AMA
          Just received advice from the U30 developer. Some DXpeditions callsigns have to be coded into U30 with the correct DXCC Entity. This is needed when the
          Message 4 of 13 , Jul 29 6:54 PM
          • 0 Attachment
            Just received advice from the U30 developer.

            Some DXpeditions callsigns have to be coded into U30 with the correct
            DXCC Entity.
            This is needed when the callsign format is associated with more than one
            DXCC Entity.

            Current examples
            TO2D = Saint Barthelemy
            TO2U = St Pierre & Miquelon

            Also Some special event callsigns that follow no known Country/Callsign
            format have to be added to U30.

            Updates to U30 are rolled-out every week.

            de Laurie, VK3AMA


            On 28/07/2012 2:25 PM, signal wrote:
            >
            >
            > I had a qso with a station TO2D today. He was on an island dxpedition.
            > Saint Barthelemy DXpedition 2012
            > HB9EOU, HB9CVC
            >
            > St. Barthelemy
            >
            > The U30 is not accepting it. The error message is below. How do I get
            > the program to recognize the qso?
            >
            >
            > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
            >
            > ERROR: >>>
            > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
            > <EOR>
            >
            >
            > 73 Eddy N4ABN
            >
          • signal
            Hi Laurie, Updated earlier and it fixed it. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
            Message 5 of 13 , Jul 30 1:42 AM
            • 0 Attachment
              Hi Laurie,

              Updated earlier and it fixed it.

              73 Eddy N4ABN


              On 7/29/2012 9:54 PM, Laurie, VK3AMA wrote:
               

              Just received advice from the U30 developer.

              Some DXpeditions callsigns have to be coded into U30 with the correct
              DXCC Entity.
              This is needed when the callsign format is associated with more than one
              DXCC Entity.

              Current examples
              TO2D = Saint Barthelemy
              TO2U = St Pierre & Miquelon

              Also Some special event callsigns that follow no known Country/Callsign
              format have to be added to U30.

              Updates to U30 are rolled-out every week.

              de Laurie, VK3AMA

              On 28/07/2012 2:25 PM, signal wrote:
              >
              >
              > I had a qso with a station TO2D today. He was on an island dxpedition.
              > Saint Barthelemy DXpedition 2012
              > HB9EOU, HB9CVC
              >
              > St. Barthelemy
              >
              > The U30 is not accepting it. The error message is below. How do I get
              > the program to recognize the qso?
              >
              >
              > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
              >
              > ERROR: >>>
              > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
              > <EOR>
              >
              >
              > 73 Eddy N4ABN
              >


              -- 
              If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
              
              https://sites.google.com/site/n4abnradio/
            Your message has been successfully submitted and would be delivered to recipients shortly.