Loading ...
Sorry, an error occurred while loading the content.

Re: [30MDG] error log

Expand Messages
  • Laurie, VK3AMA
    Eddy, I put TO2D into DXKeeper and it comes back as 516 The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516 See it here...
    Message 1 of 13 , Jul 27, 2012
    • 0 Attachment
      Eddy,

      I put TO2D into DXKeeper and it comes back as 516

      The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
      See it here...
      http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf

      de Laurie, VK3AMA


      On 28/07/2012 4:41 PM, signal wrote:
      >
      >
      > Hi Laurie,
      >
      > I can't find what the DXCC country code should be. Do you know where I
      > can find it on the internet?
      >
      > 73 Eddy N4ABN
      >
      > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
      >>
      >> Eddy,
      >>
      >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
      >> invalid dxcc country code. Looks like there is no dxcc set in your
      >> logger, so the adif export tagged the dxcc as 0.
      >>
      >> If you adjust the QSO in your logger to the correct dxcc and then try an
      >> export again I think it should work.
      >>
      >> Regards
      >> Laurie, VK3AMA
      >>
      >> On 28/07/2012 2:25 PM, signal wrote:
      >> >
      >> >
      >> > I had a qso with a station TO2D today. He was on an island dxpedition.
      >> > Saint Barthelemy DXpedition 2012
      >> > HB9EOU, HB9CVC
      >> >
      >> > St. Barthelemy
      >> >
      >> > The U30 is not accepting it. The error message is below. How do I get
      >> > the program to recognize the qso?
      >> >
      >> >
      >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
      >> >
      >> > ERROR: >>>
      >> >
      >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
      >>
      >> > <EOR>
      >> >
      >> >
      >> > 73 Eddy N4ABN
      >> >
      >> >
      >> >
      >> >
      >>
      >
      > --
      > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
      >
      > https://sites.google.com/site/n4abnradio/
      >
      >
      >
    • signal
      Hi Laurie, I opened the log to see what it is logged for the DXCC code and that s what it shows (516) but when it s imported into U30 it s changed and gets
      Message 2 of 13 , Jul 28, 2012
      • 0 Attachment
        Hi Laurie,

        I opened the log to see what it is logged for the DXCC code and that's what it shows (516) but when it's imported into U30 it's changed and gets reported as an error. Can I correct the problem some how or is that not supposed to be done by me?

        73 Eddy  N4ABN


        On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
         

        Eddy,

        I put TO2D into DXKeeper and it comes back as 516

        The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
        See it here...
        http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf

        de Laurie, VK3AMA

        On 28/07/2012 4:41 PM, signal wrote:
        >
        >
        > Hi Laurie,
        >
        > I can't find what the DXCC country code should be. Do you know where I
        > can find it on the internet?
        >
        > 73 Eddy N4ABN
        >
        > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
        >>
        >> Eddy,
        >>
        >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
        >> invalid dxcc country code. Looks like there is no dxcc set in your
        >> logger, so the adif export tagged the dxcc as 0.
        >>
        >> If you adjust the QSO in your logger to the correct dxcc and then try an
        >> export again I think it should work.
        >>
        >> Regards
        >> Laurie, VK3AMA
        >>
        >> On 28/07/2012 2:25 PM, signal wrote:
        >> >
        >> >
        >> > I had a qso with a station TO2D today. He was on an island dxpedition.
        >> > Saint Barthelemy DXpedition 2012
        >> > HB9EOU, HB9CVC
        >> >
        >> > St. Barthelemy
        >> >
        >> > The U30 is not accepting it. The error message is below. How do I get
        >> > the program to recognize the qso?
        >> >
        >> >
        >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
        >> >
        >> > ERROR: >>>
        >> >
        >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
        >>
        >> > <EOR>
        >> >
        >> >
        >> > 73 Eddy N4ABN
        >> >
        >> >
        >> >
        >> >
        >>
        >
        > --
        > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
        >
        > https://sites.google.com/site/n4abnradio/
        >
        >
        >


        -- 
        If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
        
        https://sites.google.com/site/n4abnradio/
      • Laurie, VK3AMA
        Eddy, Have you confirmed that the correct code is in the adif file? I wouldn t expect U30 to modify the adif file. When I have used U30, I haven t seen any
        Message 3 of 13 , Jul 28, 2012
        • 0 Attachment
          Eddy,

          Have you confirmed that the correct code is in the adif file?

          I wouldn't expect U30 to modify the adif file. When I have used U30, I
          haven't seen any evidence of it modifying the adif.

          If the correct code is in your adif, and U30 is reporting the dxcc code
          as 0 then that will need to be taken up with the author of U30. I could
          forward the email to him if it is clear that your adif file has the
          correct code and U30 is reporting otherwise.

          BTW the adif tag will be <DXCC:3>516

          Laurie, VK3AMA


          On 28/07/2012 5:01 PM, signal wrote:
          >
          >
          > Hi Laurie,
          >
          > I opened the log to see what it is logged for the DXCC code and that's
          > what it shows (516) but when it's imported into U30 it's changed and
          > gets reported as an error. Can I correct the problem some how or is
          > that not supposed to be done by me?
          >
          > 73 Eddy N4ABN
          >
          >
          > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
          >>
          >> Eddy,
          >>
          >> I put TO2D into DXKeeper and it comes back as 516
          >>
          >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
          >> See it here...
          >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
          >>
          >> de Laurie, VK3AMA
          >>
          >> On 28/07/2012 4:41 PM, signal wrote:
          >> >
          >> >
          >> > Hi Laurie,
          >> >
          >> > I can't find what the DXCC country code should be. Do you know where I
          >> > can find it on the internet?
          >> >
          >> > 73 Eddy N4ABN
          >> >
          >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
          >> >>
          >> >> Eddy,
          >> >>
          >> >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
          >> >> invalid dxcc country code. Looks like there is no dxcc set in your
          >> >> logger, so the adif export tagged the dxcc as 0.
          >> >>
          >> >> If you adjust the QSO in your logger to the correct dxcc and then
          >> try an
          >> >> export again I think it should work.
          >> >>
          >> >> Regards
          >> >> Laurie, VK3AMA
          >> >>
          >> >> On 28/07/2012 2:25 PM, signal wrote:
          >> >> >
          >> >> >
          >> >> > I had a qso with a station TO2D today. He was on an island
          >> dxpedition.
          >> >> > Saint Barthelemy DXpedition 2012
          >> >> > HB9EOU, HB9CVC
          >> >> >
          >> >> > St. Barthelemy
          >> >> >
          >> >> > The U30 is not accepting it. The error message is below. How do
          >> I get
          >> >> > the program to recognize the qso?
          >> >> >
          >> >> >
          >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
          >> >> >
          >> >> > ERROR: >>>
          >> >> >
          >> >>
          >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
          >>
          >> >>
          >> >> > <EOR>
          >> >> >
          >> >> >
          >> >> > 73 Eddy N4ABN
          >> >> >
          >> >> >
          >> >> >
          >> >> >
          >> >>
          >> >
          >>
        • signal
          Laurie, Yes I looked and I believe it s logged correct. This is a partial of the log below... 30M TO2D FJ
          Message 4 of 13 , Jul 28, 2012
          • 0 Attachment
            Laurie,

            Yes I looked and I believe it's logged correct. This is a partial of the log below...

            <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516 <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727 <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599 <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11 <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St. Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123 <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0 <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727 <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00 <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>


            On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
             

            Eddy,

            Have you confirmed that the correct code is in the adif file?

            I wouldn't expect U30 to modify the adif file. When I have used U30, I
            haven't seen any evidence of it modifying the adif.

            If the correct code is in your adif, and U30 is reporting the dxcc code
            as 0 then that will need to be taken up with the author of U30. I could
            forward the email to him if it is clear that your adif file has the
            correct code and U30 is reporting otherwise.

            BTW the adif tag will be <DXCC:3>516

            Laurie, VK3AMA

            On 28/07/2012 5:01 PM, signal wrote:
            >
            >
            > Hi Laurie,
            >
            > I opened the log to see what it is logged for the DXCC code and that's
            > what it shows (516) but when it's imported into U30 it's changed and
            > gets reported as an error. Can I correct the problem some how or is
            > that not supposed to be done by me?
            >
            > 73 Eddy N4ABN
            >
            >
            > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
            >>
            >> Eddy,
            >>
            >> I put TO2D into DXKeeper and it comes back as 516
            >>
            >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
            >> See it here...
            >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
            >>
            >> de Laurie, VK3AMA
            >>
            >> On 28/07/2012 4:41 PM, signal wrote:
            >> >
            >> >
            >> > Hi Laurie,
            >> >
            >> > I can't find what the DXCC country code should be. Do you know where I
            >> > can find it on the internet?
            >> >
            >> > 73 Eddy N4ABN
            >> >
            >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
            >> >>
            >> >> Eddy,
            >> >>
            >> >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
            >> >> invalid dxcc country code. Looks like there is no dxcc set in your
            >> >> logger, so the adif export tagged the dxcc as 0.
            >> >>
            >> >> If you adjust the QSO in your logger to the correct dxcc and then
            >> try an
            >> >> export again I think it should work.
            >> >>
            >> >> Regards
            >> >> Laurie, VK3AMA
            >> >>
            >> >> On 28/07/2012 2:25 PM, signal wrote:
            >> >> >
            >> >> >
            >> >> > I had a qso with a station TO2D today. He was on an island
            >> dxpedition.
            >> >> > Saint Barthelemy DXpedition 2012
            >> >> > HB9EOU, HB9CVC
            >> >> >
            >> >> > St. Barthelemy
            >> >> >
            >> >> > The U30 is not accepting it. The error message is below. How do
            >> I get
            >> >> > the program to recognize the qso?
            >> >> >
            >> >> >
            >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
            >> >> >
            >> >> > ERROR: >>>
            >> >> >
            >> >>
            >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
            >>
            >> >>
            >> >> > <EOR>
            >> >> >
            >> >> >
            >> >> > 73 Eddy N4ABN
            >> >> >
            >> >> >
            >> >> >
            >> >> >
            >> >>
            >> >
            >>


            -- 
            If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
            
            https://sites.google.com/site/n4abnradio/
          • Laurie, VK3AMA
            OK Eddy, I have forwarded this email thread to the U30 developer, John OE3JPK I wont publish his email address here, but it is listed on the U30 page
            Message 5 of 13 , Jul 28, 2012
            • 0 Attachment
              OK Eddy,
              I have forwarded this email thread to the U30 developer, John OE3JPK
              I wont publish his email address here, but it is listed on the U30 page
              http://www.u30.hf-core.at/ just above the flags counter

              Regards
              Laurie VK3AMA


              On 28/07/2012 5:21 PM, signal wrote:
              >
              >
              > Laurie,
              >
              > Yes I looked and I believe it's logged correct. This is a partial of
              > the log below...
              >
              > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
              > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
              > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
              > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
              > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
              > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
              > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
              > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
              > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
              > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
              > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
              > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
              > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
              > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
              > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
              > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
              >
              >
              > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
              >>
              >> Eddy,
              >>
              >> Have you confirmed that the correct code is in the adif file?
              >>
              >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
              >> haven't seen any evidence of it modifying the adif.
              >>
              >> If the correct code is in your adif, and U30 is reporting the dxcc code
              >> as 0 then that will need to be taken up with the author of U30. I could
              >> forward the email to him if it is clear that your adif file has the
              >> correct code and U30 is reporting otherwise.
              >>
              >> BTW the adif tag will be <DXCC:3>516
              >>
              >> Laurie, VK3AMA
              >>
              >> On 28/07/2012 5:01 PM, signal wrote:
              >> >
              >> >
              >> > Hi Laurie,
              >> >
              >> > I opened the log to see what it is logged for the DXCC code and that's
              >> > what it shows (516) but when it's imported into U30 it's changed and
              >> > gets reported as an error. Can I correct the problem some how or is
              >> > that not supposed to be done by me?
              >> >
              >> > 73 Eddy N4ABN
              >> >
              >> >
              >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
              >> >>
              >> >> Eddy,
              >> >>
              >> >> I put TO2D into DXKeeper and it comes back as 516
              >> >>
              >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
              >> as 516
              >> >> See it here...
              >> >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
              >> >>
              >> >> de Laurie, VK3AMA
              >> >>
              >> >> On 28/07/2012 4:41 PM, signal wrote:
              >> >> >
              >> >> >
              >> >> > Hi Laurie,
              >> >> >
              >> >> > I can't find what the DXCC country code should be. Do you know
              >> where I
              >> >> > can find it on the internet?
              >> >> >
              >> >> > 73 Eddy N4ABN
              >> >> >
              >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
              >> >> >>
              >> >> >> Eddy,
              >> >> >>
              >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
              >> indicates an
              >> >> >> invalid dxcc country code. Looks like there is no dxcc set in your
              >> >> >> logger, so the adif export tagged the dxcc as 0.
              >> >> >>
              >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
              >> >> try an
              >> >> >> export again I think it should work.
              >> >> >>
              >> >> >> Regards
              >> >> >> Laurie, VK3AMA
              >> >> >>
              >> >> >> On 28/07/2012 2:25 PM, signal wrote:
              >> >> >> >
              >> >> >> >
              >> >> >> > I had a qso with a station TO2D today. He was on an island
              >> >> dxpedition.
              >> >> >> > Saint Barthelemy DXpedition 2012
              >> >> >> > HB9EOU, HB9CVC
              >> >> >> >
              >> >> >> > St. Barthelemy
              >> >> >> >
              >> >> >> > The U30 is not accepting it. The error message is below. How do
              >> >> I get
              >> >> >> > the program to recognize the qso?
              >> >> >> >
              >> >> >> >
              >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
              >> >> >> >
              >> >> >> > ERROR: >>>
              >> >> >> >
              >> >> >>
              >> >>
              >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
              >>
              >> >>
              >> >> >>
              >> >> >> > <EOR>
              >> >> >> >
              >> >> >> >
              >> >> >> > 73 Eddy N4ABN
              >> >> >> >
              >> >> >> >
              >> >> >> >
              >> >> >> >
              >> >> >>
              >> >> >
              >> >>
              >>
            • signal
              Hi Laurie, Thanks for your help Laurie. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
              Message 6 of 13 , Jul 28, 2012
              • 0 Attachment
                Hi Laurie,

                Thanks for your help Laurie.

                73 Eddy N4ABN


                On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                 

                OK Eddy,
                I have forwarded this email thread to the U30 developer, John OE3JPK
                I wont publish his email address here, but it is listed on the U30 page
                http://www.u30.hf-core.at/ just above the flags counter

                Regards
                Laurie VK3AMA

                On 28/07/2012 5:21 PM, signal wrote:
                >
                >
                > Laurie,
                >
                > Yes I looked and I believe it's logged correct. This is a partial of
                > the log below...
                >
                > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                >
                >
                > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                >>
                >> Eddy,
                >>
                >> Have you confirmed that the correct code is in the adif file?
                >>
                >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                >> haven't seen any evidence of it modifying the adif.
                >>
                >> If the correct code is in your adif, and U30 is reporting the dxcc code
                >> as 0 then that will need to be taken up with the author of U30. I could
                >> forward the email to him if it is clear that your adif file has the
                >> correct code and U30 is reporting otherwise.
                >>
                >> BTW the adif tag will be <DXCC:3>516
                >>
                >> Laurie, VK3AMA
                >>
                >> On 28/07/2012 5:01 PM, signal wrote:
                >> >
                >> >
                >> > Hi Laurie,
                >> >
                >> > I opened the log to see what it is logged for the DXCC code and that's
                >> > what it shows (516) but when it's imported into U30 it's changed and
                >> > gets reported as an error. Can I correct the problem some how or is
                >> > that not supposed to be done by me?
                >> >
                >> > 73 Eddy N4ABN
                >> >
                >> >
                >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                >> >>
                >> >> Eddy,
                >> >>
                >> >> I put TO2D into DXKeeper and it comes back as 516
                >> >>
                >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                >> as 516
                >> >> See it here...
                >> >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                >> >>
                >> >> de Laurie, VK3AMA
                >> >>
                >> >> On 28/07/2012 4:41 PM, signal wrote:
                >> >> >
                >> >> >
                >> >> > Hi Laurie,
                >> >> >
                >> >> > I can't find what the DXCC country code should be. Do you know
                >> where I
                >> >> > can find it on the internet?
                >> >> >
                >> >> > 73 Eddy N4ABN
                >> >> >
                >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                >> >> >>
                >> >> >> Eddy,
                >> >> >>
                >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                >> indicates an
                >> >> >> invalid dxcc country code. Looks like there is no dxcc set in your
                >> >> >> logger, so the adif export tagged the dxcc as 0.
                >> >> >>
                >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                >> >> try an
                >> >> >> export again I think it should work.
                >> >> >>
                >> >> >> Regards
                >> >> >> Laurie, VK3AMA
                >> >> >>
                >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                >> >> >> >
                >> >> >> >
                >> >> >> > I had a qso with a station TO2D today. He was on an island
                >> >> dxpedition.
                >> >> >> > Saint Barthelemy DXpedition 2012
                >> >> >> > HB9EOU, HB9CVC
                >> >> >> >
                >> >> >> > St. Barthelemy
                >> >> >> >
                >> >> >> > The U30 is not accepting it. The error message is below. How do
                >> >> I get
                >> >> >> > the program to recognize the qso?
                >> >> >> >
                >> >> >> >
                >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                >> >> >> >
                >> >> >> > ERROR: >>>
                >> >> >> >
                >> >> >>
                >> >>
                >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                >>
                >> >>
                >> >> >>
                >> >> >> > <EOR>
                >> >> >> >
                >> >> >> >
                >> >> >> > 73 Eddy N4ABN
                >> >> >> >
                >> >> >> >
                >> >> >> >
                >> >> >> >
                >> >> >>
                >> >> >
                >> >>
                >>


                -- 
                If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                
                https://sites.google.com/site/n4abnradio/
              • dl6xaz
                Hi Eddy and Laurie, just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This
                Message 7 of 13 , Jul 28, 2012
                • 0 Attachment
                  Hi Eddy and Laurie,
                  just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
                  vy73 Fred DL6XAZ


                  --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
                  >
                  > Hi Laurie,
                  >
                  > Thanks for your help Laurie.
                  >
                  > 73 Eddy N4ABN
                  >
                  >
                  > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                  > >
                  > > OK Eddy,
                  > > I have forwarded this email thread to the U30 developer, John OE3JPK
                  > > I wont publish his email address here, but it is listed on the U30 page
                  > > http://www.u30.hf-core.at/ just above the flags counter
                  > >
                  > > Regards
                  > > Laurie VK3AMA
                  > >
                  > > On 28/07/2012 5:21 PM, signal wrote:
                  > > >
                  > > >
                  > > > Laurie,
                  > > >
                  > > > Yes I looked and I believe it's logged correct. This is a partial of
                  > > > the log below...
                  > > >
                  > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                  > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                  > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                  > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                  > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                  > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                  > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                  > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                  > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                  > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                  > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                  > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                  > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                  > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                  > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                  > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                  > > >
                  > > >
                  > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                  > > >>
                  > > >> Eddy,
                  > > >>
                  > > >> Have you confirmed that the correct code is in the adif file?
                  > > >>
                  > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                  > > >> haven't seen any evidence of it modifying the adif.
                  > > >>
                  > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
                  > > >> as 0 then that will need to be taken up with the author of U30. I could
                  > > >> forward the email to him if it is clear that your adif file has the
                  > > >> correct code and U30 is reporting otherwise.
                  > > >>
                  > > >> BTW the adif tag will be <DXCC:3>516
                  > > >>
                  > > >> Laurie, VK3AMA
                  > > >>
                  > > >> On 28/07/2012 5:01 PM, signal wrote:
                  > > >> >
                  > > >> >
                  > > >> > Hi Laurie,
                  > > >> >
                  > > >> > I opened the log to see what it is logged for the DXCC code and
                  > > that's
                  > > >> > what it shows (516) but when it's imported into U30 it's changed and
                  > > >> > gets reported as an error. Can I correct the problem some how or is
                  > > >> > that not supposed to be done by me?
                  > > >> >
                  > > >> > 73 Eddy N4ABN
                  > > >> >
                  > > >> >
                  > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                  > > >> >>
                  > > >> >> Eddy,
                  > > >> >>
                  > > >> >> I put TO2D into DXKeeper and it comes back as 516
                  > > >> >>
                  > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                  > > >> as 516
                  > > >> >> See it here...
                  > > >> >>
                  > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                  > > >> >>
                  > > >> >> de Laurie, VK3AMA
                  > > >> >>
                  > > >> >> On 28/07/2012 4:41 PM, signal wrote:
                  > > >> >> >
                  > > >> >> >
                  > > >> >> > Hi Laurie,
                  > > >> >> >
                  > > >> >> > I can't find what the DXCC country code should be. Do you know
                  > > >> where I
                  > > >> >> > can find it on the internet?
                  > > >> >> >
                  > > >> >> > 73 Eddy N4ABN
                  > > >> >> >
                  > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                  > > >> >> >>
                  > > >> >> >> Eddy,
                  > > >> >> >>
                  > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                  > > >> indicates an
                  > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
                  > > your
                  > > >> >> >> logger, so the adif export tagged the dxcc as 0.
                  > > >> >> >>
                  > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                  > > >> >> try an
                  > > >> >> >> export again I think it should work.
                  > > >> >> >>
                  > > >> >> >> Regards
                  > > >> >> >> Laurie, VK3AMA
                  > > >> >> >>
                  > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >> > I had a qso with a station TO2D today. He was on an island
                  > > >> >> dxpedition.
                  > > >> >> >> > Saint Barthelemy DXpedition 2012
                  > > >> >> >> > HB9EOU, HB9CVC
                  > > >> >> >> >
                  > > >> >> >> > St. Barthelemy
                  > > >> >> >> >
                  > > >> >> >> > The U30 is not accepting it. The error message is below. How do
                  > > >> >> I get
                  > > >> >> >> > the program to recognize the qso?
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                  > > >> >> >> >
                  > > >> >> >> > ERROR: >>>
                  > > >> >> >> >
                  > > >> >> >>
                  > > >> >>
                  > > >>
                  > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                  > >
                  > > >>
                  > > >> >>
                  > > >> >> >>
                  > > >> >> >> > <EOR>
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >> > 73 Eddy N4ABN
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >> >
                  > > >> >> >>
                  > > >> >> >
                  > > >> >>
                  > > >>
                  > >
                  > >
                  >
                  > --
                  > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                  >
                  > https://sites.google.com/site/n4abnradio/
                  >
                • signal
                  Hi Fred, I don t know how many other members have had qso s with TO2D but they are going to be there till next month sometime. 73 Eddy N4ABN ... -- If you do
                  Message 8 of 13 , Jul 28, 2012
                  • 0 Attachment
                    Hi Fred,

                    I don't know how many other members have had qso's with TO2D but they are going to be there till next month sometime.

                    73 Eddy N4ABN


                    On 7/28/2012 2:59 PM, dl6xaz wrote:
                     

                    Hi Eddy and Laurie,
                    just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
                    vy73 Fred DL6XAZ

                    --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
                    >
                    > Hi Laurie,
                    >
                    > Thanks for your help Laurie.
                    >
                    > 73 Eddy N4ABN
                    >
                    >
                    > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                    > >
                    > > OK Eddy,
                    > > I have forwarded this email thread to the U30 developer, John OE3JPK
                    > > I wont publish his email address here, but it is listed on the U30 page
                    > > http://www.u30.hf-core.at/ just above the flags counter
                    > >
                    > > Regards
                    > > Laurie VK3AMA
                    > >
                    > > On 28/07/2012 5:21 PM, signal wrote:
                    > > >
                    > > >
                    > > > Laurie,
                    > > >
                    > > > Yes I looked and I believe it's logged correct. This is a partial of
                    > > > the log below...
                    > > >
                    > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                    > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                    > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                    > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                    > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                    > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                    > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                    > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                    > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                    > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                    > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                    > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                    > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                    > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                    > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                    > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                    > > >
                    > > >
                    > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                    > > >>
                    > > >> Eddy,
                    > > >>
                    > > >> Have you confirmed that the correct code is in the adif file?
                    > > >>
                    > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                    > > >> haven't seen any evidence of it modifying the adif.
                    > > >>
                    > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
                    > > >> as 0 then that will need to be taken up with the author of U30. I could
                    > > >> forward the email to him if it is clear that your adif file has the
                    > > >> correct code and U30 is reporting otherwise.
                    > > >>
                    > > >> BTW the adif tag will be <DXCC:3>516
                    > > >>
                    > > >> Laurie, VK3AMA
                    > > >>
                    > > >> On 28/07/2012 5:01 PM, signal wrote:
                    > > >> >
                    > > >> >
                    > > >> > Hi Laurie,
                    > > >> >
                    > > >> > I opened the log to see what it is logged for the DXCC code and
                    > > that's
                    > > >> > what it shows (516) but when it's imported into U30 it's changed and
                    > > >> > gets reported as an error. Can I correct the problem some how or is
                    > > >> > that not supposed to be done by me?
                    > > >> >
                    > > >> > 73 Eddy N4ABN
                    > > >> >
                    > > >> >
                    > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                    > > >> >>
                    > > >> >> Eddy,
                    > > >> >>
                    > > >> >> I put TO2D into DXKeeper and it comes back as 516
                    > > >> >>
                    > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                    > > >> as 516
                    > > >> >> See it here...
                    > > >> >>
                    > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                    > > >> >>
                    > > >> >> de Laurie, VK3AMA
                    > > >> >>
                    > > >> >> On 28/07/2012 4:41 PM, signal wrote:
                    > > >> >> >
                    > > >> >> >
                    > > >> >> > Hi Laurie,
                    > > >> >> >
                    > > >> >> > I can't find what the DXCC country code should be. Do you know
                    > > >> where I
                    > > >> >> > can find it on the internet?
                    > > >> >> >
                    > > >> >> > 73 Eddy N4ABN
                    > > >> >> >
                    > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                    > > >> >> >>
                    > > >> >> >> Eddy,
                    > > >> >> >>
                    > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                    > > >> indicates an
                    > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
                    > > your
                    > > >> >> >> logger, so the adif export tagged the dxcc as 0.
                    > > >> >> >>
                    > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                    > > >> >> try an
                    > > >> >> >> export again I think it should work.
                    > > >> >> >>
                    > > >> >> >> Regards
                    > > >> >> >> Laurie, VK3AMA
                    > > >> >> >>
                    > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >> > I had a qso with a station TO2D today. He was on an island
                    > > >> >> dxpedition.
                    > > >> >> >> > Saint Barthelemy DXpedition 2012
                    > > >> >> >> > HB9EOU, HB9CVC
                    > > >> >> >> >
                    > > >> >> >> > St. Barthelemy
                    > > >> >> >> >
                    > > >> >> >> > The U30 is not accepting it. The error message is below. How do
                    > > >> >> I get
                    > > >> >> >> > the program to recognize the qso?
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                    > > >> >> >> >
                    > > >> >> >> > ERROR: >>>
                    > > >> >> >> >
                    > > >> >> >>
                    > > >> >>
                    > > >>
                    > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                    > >
                    > > >>
                    > > >> >>
                    > > >> >> >>
                    > > >> >> >> > <EOR>
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >> > 73 Eddy N4ABN
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >> >
                    > > >> >> >>
                    > > >> >> >
                    > > >> >>
                    > > >>
                    > >
                    > >
                    >
                    > --
                    > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                    >
                    > https://sites.google.com/site/n4abnradio/
                    >


                    -- 
                    If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                    
                    https://sites.google.com/site/n4abnradio/
                  • Laurie, VK3AMA
                    Just received advice from the U30 developer. Some DXpeditions callsigns have to be coded into U30 with the correct DXCC Entity. This is needed when the
                    Message 9 of 13 , Jul 29, 2012
                    • 0 Attachment
                      Just received advice from the U30 developer.

                      Some DXpeditions callsigns have to be coded into U30 with the correct
                      DXCC Entity.
                      This is needed when the callsign format is associated with more than one
                      DXCC Entity.

                      Current examples
                      TO2D = Saint Barthelemy
                      TO2U = St Pierre & Miquelon

                      Also Some special event callsigns that follow no known Country/Callsign
                      format have to be added to U30.

                      Updates to U30 are rolled-out every week.

                      de Laurie, VK3AMA


                      On 28/07/2012 2:25 PM, signal wrote:
                      >
                      >
                      > I had a qso with a station TO2D today. He was on an island dxpedition.
                      > Saint Barthelemy DXpedition 2012
                      > HB9EOU, HB9CVC
                      >
                      > St. Barthelemy
                      >
                      > The U30 is not accepting it. The error message is below. How do I get
                      > the program to recognize the qso?
                      >
                      >
                      > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                      >
                      > ERROR: >>>
                      > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                      > <EOR>
                      >
                      >
                      > 73 Eddy N4ABN
                      >
                    • signal
                      Hi Laurie, Updated earlier and it fixed it. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                      Message 10 of 13 , Jul 30, 2012
                      • 0 Attachment
                        Hi Laurie,

                        Updated earlier and it fixed it.

                        73 Eddy N4ABN


                        On 7/29/2012 9:54 PM, Laurie, VK3AMA wrote:
                         

                        Just received advice from the U30 developer.

                        Some DXpeditions callsigns have to be coded into U30 with the correct
                        DXCC Entity.
                        This is needed when the callsign format is associated with more than one
                        DXCC Entity.

                        Current examples
                        TO2D = Saint Barthelemy
                        TO2U = St Pierre & Miquelon

                        Also Some special event callsigns that follow no known Country/Callsign
                        format have to be added to U30.

                        Updates to U30 are rolled-out every week.

                        de Laurie, VK3AMA

                        On 28/07/2012 2:25 PM, signal wrote:
                        >
                        >
                        > I had a qso with a station TO2D today. He was on an island dxpedition.
                        > Saint Barthelemy DXpedition 2012
                        > HB9EOU, HB9CVC
                        >
                        > St. Barthelemy
                        >
                        > The U30 is not accepting it. The error message is below. How do I get
                        > the program to recognize the qso?
                        >
                        >
                        > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                        >
                        > ERROR: >>>
                        > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                        > <EOR>
                        >
                        >
                        > 73 Eddy N4ABN
                        >


                        -- 
                        If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                        
                        https://sites.google.com/site/n4abnradio/
                      Your message has been successfully submitted and would be delivered to recipients shortly.