Loading ...
Sorry, an error occurred while loading the content.

error log

Expand Messages
  • signal
    I had a qso with a station TO2D today. He was on an island dxpedition. Saint Barthelemy DXpedition 2012 HB9EOU, HB9CVC St. Barthelemy The U30 is not accepting
    Message 1 of 13 , Jul 27, 2012
    • 0 Attachment
      I had a qso with a station TO2D today. He was on an island dxpedition. Saint Barthelemy DXpedition 2012
      HB9EOU, HB9CVC

      St. Barthelemy

      The U30 is not accepting it. The error message is below. How do I get the program to recognize the qso?


      ===> Log-ERROR: CALL-Assignment not possible ->> TO2D

      ERROR: >>> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN <EOR>


      73 Eddy N4ABN
       
    • Laurie, VK3AMA
      Eddy, You will notice this * 0* in your adif file. Zero indicates an invalid dxcc country code. Looks like there is no dxcc set in your logger, so the
      Message 2 of 13 , Jul 27, 2012
      • 0 Attachment
        Eddy,

        You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
        invalid dxcc country code. Looks like there is no dxcc set in your
        logger, so the adif export tagged the dxcc as 0.

        If you adjust the QSO in your logger to the correct dxcc and then try an
        export again I think it should work.

        Regards
        Laurie, VK3AMA


        On 28/07/2012 2:25 PM, signal wrote:
        >
        >
        > I had a qso with a station TO2D today. He was on an island dxpedition.
        > Saint Barthelemy DXpedition 2012
        > HB9EOU, HB9CVC
        >
        > St. Barthelemy
        >
        > The U30 is not accepting it. The error message is below. How do I get
        > the program to recognize the qso?
        >
        >
        > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
        >
        > ERROR: >>>
        > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
        > <EOR>
        >
        >
        > 73 Eddy N4ABN
        >
        >
        >
        >
      • signal
        Hi Laurie, I can t find what the DXCC country code should be. Do you know where I can find it on the internet? 73 Eddy N4ABN ... -- If you do not feel
        Message 3 of 13 , Jul 27, 2012
        • 0 Attachment
          Hi Laurie,

          I can't find what the DXCC country code should be. Do you know where I can find it on the internet?

          73 Eddy N4ABN

          On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
           

          Eddy,

          You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
          invalid dxcc country code. Looks like there is no dxcc set in your
          logger, so the adif export tagged the dxcc as 0.

          If you adjust the QSO in your logger to the correct dxcc and then try an
          export again I think it should work.

          Regards
          Laurie, VK3AMA

          On 28/07/2012 2:25 PM, signal wrote:
          >
          >
          > I had a qso with a station TO2D today. He was on an island dxpedition.
          > Saint Barthelemy DXpedition 2012
          > HB9EOU, HB9CVC
          >
          > St. Barthelemy
          >
          > The U30 is not accepting it. The error message is below. How do I get
          > the program to recognize the qso?
          >
          >
          > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
          >
          > ERROR: >>>
          > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
          > <EOR>
          >
          >
          > 73 Eddy N4ABN
          >
          >
          >
          >


          -- 
          If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
          
          https://sites.google.com/site/n4abnradio/
        • Laurie, VK3AMA
          Eddy, I put TO2D into DXKeeper and it comes back as 516 The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516 See it here...
          Message 4 of 13 , Jul 27, 2012
          • 0 Attachment
            Eddy,

            I put TO2D into DXKeeper and it comes back as 516

            The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
            See it here...
            http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf

            de Laurie, VK3AMA


            On 28/07/2012 4:41 PM, signal wrote:
            >
            >
            > Hi Laurie,
            >
            > I can't find what the DXCC country code should be. Do you know where I
            > can find it on the internet?
            >
            > 73 Eddy N4ABN
            >
            > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
            >>
            >> Eddy,
            >>
            >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
            >> invalid dxcc country code. Looks like there is no dxcc set in your
            >> logger, so the adif export tagged the dxcc as 0.
            >>
            >> If you adjust the QSO in your logger to the correct dxcc and then try an
            >> export again I think it should work.
            >>
            >> Regards
            >> Laurie, VK3AMA
            >>
            >> On 28/07/2012 2:25 PM, signal wrote:
            >> >
            >> >
            >> > I had a qso with a station TO2D today. He was on an island dxpedition.
            >> > Saint Barthelemy DXpedition 2012
            >> > HB9EOU, HB9CVC
            >> >
            >> > St. Barthelemy
            >> >
            >> > The U30 is not accepting it. The error message is below. How do I get
            >> > the program to recognize the qso?
            >> >
            >> >
            >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
            >> >
            >> > ERROR: >>>
            >> >
            >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
            >>
            >> > <EOR>
            >> >
            >> >
            >> > 73 Eddy N4ABN
            >> >
            >> >
            >> >
            >> >
            >>
            >
            > --
            > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
            >
            > https://sites.google.com/site/n4abnradio/
            >
            >
            >
          • signal
            Hi Laurie, I opened the log to see what it is logged for the DXCC code and that s what it shows (516) but when it s imported into U30 it s changed and gets
            Message 5 of 13 , Jul 28, 2012
            • 0 Attachment
              Hi Laurie,

              I opened the log to see what it is logged for the DXCC code and that's what it shows (516) but when it's imported into U30 it's changed and gets reported as an error. Can I correct the problem some how or is that not supposed to be done by me?

              73 Eddy  N4ABN


              On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
               

              Eddy,

              I put TO2D into DXKeeper and it comes back as 516

              The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
              See it here...
              http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf

              de Laurie, VK3AMA

              On 28/07/2012 4:41 PM, signal wrote:
              >
              >
              > Hi Laurie,
              >
              > I can't find what the DXCC country code should be. Do you know where I
              > can find it on the internet?
              >
              > 73 Eddy N4ABN
              >
              > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
              >>
              >> Eddy,
              >>
              >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
              >> invalid dxcc country code. Looks like there is no dxcc set in your
              >> logger, so the adif export tagged the dxcc as 0.
              >>
              >> If you adjust the QSO in your logger to the correct dxcc and then try an
              >> export again I think it should work.
              >>
              >> Regards
              >> Laurie, VK3AMA
              >>
              >> On 28/07/2012 2:25 PM, signal wrote:
              >> >
              >> >
              >> > I had a qso with a station TO2D today. He was on an island dxpedition.
              >> > Saint Barthelemy DXpedition 2012
              >> > HB9EOU, HB9CVC
              >> >
              >> > St. Barthelemy
              >> >
              >> > The U30 is not accepting it. The error message is below. How do I get
              >> > the program to recognize the qso?
              >> >
              >> >
              >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
              >> >
              >> > ERROR: >>>
              >> >
              >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
              >>
              >> > <EOR>
              >> >
              >> >
              >> > 73 Eddy N4ABN
              >> >
              >> >
              >> >
              >> >
              >>
              >
              > --
              > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
              >
              > https://sites.google.com/site/n4abnradio/
              >
              >
              >


              -- 
              If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
              
              https://sites.google.com/site/n4abnradio/
            • Laurie, VK3AMA
              Eddy, Have you confirmed that the correct code is in the adif file? I wouldn t expect U30 to modify the adif file. When I have used U30, I haven t seen any
              Message 6 of 13 , Jul 28, 2012
              • 0 Attachment
                Eddy,

                Have you confirmed that the correct code is in the adif file?

                I wouldn't expect U30 to modify the adif file. When I have used U30, I
                haven't seen any evidence of it modifying the adif.

                If the correct code is in your adif, and U30 is reporting the dxcc code
                as 0 then that will need to be taken up with the author of U30. I could
                forward the email to him if it is clear that your adif file has the
                correct code and U30 is reporting otherwise.

                BTW the adif tag will be <DXCC:3>516

                Laurie, VK3AMA


                On 28/07/2012 5:01 PM, signal wrote:
                >
                >
                > Hi Laurie,
                >
                > I opened the log to see what it is logged for the DXCC code and that's
                > what it shows (516) but when it's imported into U30 it's changed and
                > gets reported as an error. Can I correct the problem some how or is
                > that not supposed to be done by me?
                >
                > 73 Eddy N4ABN
                >
                >
                > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                >>
                >> Eddy,
                >>
                >> I put TO2D into DXKeeper and it comes back as 516
                >>
                >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
                >> See it here...
                >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                >>
                >> de Laurie, VK3AMA
                >>
                >> On 28/07/2012 4:41 PM, signal wrote:
                >> >
                >> >
                >> > Hi Laurie,
                >> >
                >> > I can't find what the DXCC country code should be. Do you know where I
                >> > can find it on the internet?
                >> >
                >> > 73 Eddy N4ABN
                >> >
                >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                >> >>
                >> >> Eddy,
                >> >>
                >> >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
                >> >> invalid dxcc country code. Looks like there is no dxcc set in your
                >> >> logger, so the adif export tagged the dxcc as 0.
                >> >>
                >> >> If you adjust the QSO in your logger to the correct dxcc and then
                >> try an
                >> >> export again I think it should work.
                >> >>
                >> >> Regards
                >> >> Laurie, VK3AMA
                >> >>
                >> >> On 28/07/2012 2:25 PM, signal wrote:
                >> >> >
                >> >> >
                >> >> > I had a qso with a station TO2D today. He was on an island
                >> dxpedition.
                >> >> > Saint Barthelemy DXpedition 2012
                >> >> > HB9EOU, HB9CVC
                >> >> >
                >> >> > St. Barthelemy
                >> >> >
                >> >> > The U30 is not accepting it. The error message is below. How do
                >> I get
                >> >> > the program to recognize the qso?
                >> >> >
                >> >> >
                >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                >> >> >
                >> >> > ERROR: >>>
                >> >> >
                >> >>
                >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                >>
                >> >>
                >> >> > <EOR>
                >> >> >
                >> >> >
                >> >> > 73 Eddy N4ABN
                >> >> >
                >> >> >
                >> >> >
                >> >> >
                >> >>
                >> >
                >>
              • signal
                Laurie, Yes I looked and I believe it s logged correct. This is a partial of the log below... 30M TO2D FJ
                Message 7 of 13 , Jul 28, 2012
                • 0 Attachment
                  Laurie,

                  Yes I looked and I believe it's logged correct. This is a partial of the log below...

                  <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516 <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727 <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599 <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11 <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St. Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123 <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0 <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727 <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00 <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>


                  On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                   

                  Eddy,

                  Have you confirmed that the correct code is in the adif file?

                  I wouldn't expect U30 to modify the adif file. When I have used U30, I
                  haven't seen any evidence of it modifying the adif.

                  If the correct code is in your adif, and U30 is reporting the dxcc code
                  as 0 then that will need to be taken up with the author of U30. I could
                  forward the email to him if it is clear that your adif file has the
                  correct code and U30 is reporting otherwise.

                  BTW the adif tag will be <DXCC:3>516

                  Laurie, VK3AMA

                  On 28/07/2012 5:01 PM, signal wrote:
                  >
                  >
                  > Hi Laurie,
                  >
                  > I opened the log to see what it is logged for the DXCC code and that's
                  > what it shows (516) but when it's imported into U30 it's changed and
                  > gets reported as an error. Can I correct the problem some how or is
                  > that not supposed to be done by me?
                  >
                  > 73 Eddy N4ABN
                  >
                  >
                  > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                  >>
                  >> Eddy,
                  >>
                  >> I put TO2D into DXKeeper and it comes back as 516
                  >>
                  >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy as 516
                  >> See it here...
                  >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                  >>
                  >> de Laurie, VK3AMA
                  >>
                  >> On 28/07/2012 4:41 PM, signal wrote:
                  >> >
                  >> >
                  >> > Hi Laurie,
                  >> >
                  >> > I can't find what the DXCC country code should be. Do you know where I
                  >> > can find it on the internet?
                  >> >
                  >> > 73 Eddy N4ABN
                  >> >
                  >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                  >> >>
                  >> >> Eddy,
                  >> >>
                  >> >> You will notice this *<DXCC:1>0* in your adif file. Zero indicates an
                  >> >> invalid dxcc country code. Looks like there is no dxcc set in your
                  >> >> logger, so the adif export tagged the dxcc as 0.
                  >> >>
                  >> >> If you adjust the QSO in your logger to the correct dxcc and then
                  >> try an
                  >> >> export again I think it should work.
                  >> >>
                  >> >> Regards
                  >> >> Laurie, VK3AMA
                  >> >>
                  >> >> On 28/07/2012 2:25 PM, signal wrote:
                  >> >> >
                  >> >> >
                  >> >> > I had a qso with a station TO2D today. He was on an island
                  >> dxpedition.
                  >> >> > Saint Barthelemy DXpedition 2012
                  >> >> > HB9EOU, HB9CVC
                  >> >> >
                  >> >> > St. Barthelemy
                  >> >> >
                  >> >> > The U30 is not accepting it. The error message is below. How do
                  >> I get
                  >> >> > the program to recognize the qso?
                  >> >> >
                  >> >> >
                  >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                  >> >> >
                  >> >> > ERROR: >>>
                  >> >> >
                  >> >>
                  >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                  >>
                  >> >>
                  >> >> > <EOR>
                  >> >> >
                  >> >> >
                  >> >> > 73 Eddy N4ABN
                  >> >> >
                  >> >> >
                  >> >> >
                  >> >> >
                  >> >>
                  >> >
                  >>


                  -- 
                  If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                  
                  https://sites.google.com/site/n4abnradio/
                • Laurie, VK3AMA
                  OK Eddy, I have forwarded this email thread to the U30 developer, John OE3JPK I wont publish his email address here, but it is listed on the U30 page
                  Message 8 of 13 , Jul 28, 2012
                  • 0 Attachment
                    OK Eddy,
                    I have forwarded this email thread to the U30 developer, John OE3JPK
                    I wont publish his email address here, but it is listed on the U30 page
                    http://www.u30.hf-core.at/ just above the flags counter

                    Regards
                    Laurie VK3AMA


                    On 28/07/2012 5:21 PM, signal wrote:
                    >
                    >
                    > Laurie,
                    >
                    > Yes I looked and I believe it's logged correct. This is a partial of
                    > the log below...
                    >
                    > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                    > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                    > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                    > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                    > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                    > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                    > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                    > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                    > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                    > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                    > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                    > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                    > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                    > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                    > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                    > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                    >
                    >
                    > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                    >>
                    >> Eddy,
                    >>
                    >> Have you confirmed that the correct code is in the adif file?
                    >>
                    >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                    >> haven't seen any evidence of it modifying the adif.
                    >>
                    >> If the correct code is in your adif, and U30 is reporting the dxcc code
                    >> as 0 then that will need to be taken up with the author of U30. I could
                    >> forward the email to him if it is clear that your adif file has the
                    >> correct code and U30 is reporting otherwise.
                    >>
                    >> BTW the adif tag will be <DXCC:3>516
                    >>
                    >> Laurie, VK3AMA
                    >>
                    >> On 28/07/2012 5:01 PM, signal wrote:
                    >> >
                    >> >
                    >> > Hi Laurie,
                    >> >
                    >> > I opened the log to see what it is logged for the DXCC code and that's
                    >> > what it shows (516) but when it's imported into U30 it's changed and
                    >> > gets reported as an error. Can I correct the problem some how or is
                    >> > that not supposed to be done by me?
                    >> >
                    >> > 73 Eddy N4ABN
                    >> >
                    >> >
                    >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                    >> >>
                    >> >> Eddy,
                    >> >>
                    >> >> I put TO2D into DXKeeper and it comes back as 516
                    >> >>
                    >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                    >> as 516
                    >> >> See it here...
                    >> >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                    >> >>
                    >> >> de Laurie, VK3AMA
                    >> >>
                    >> >> On 28/07/2012 4:41 PM, signal wrote:
                    >> >> >
                    >> >> >
                    >> >> > Hi Laurie,
                    >> >> >
                    >> >> > I can't find what the DXCC country code should be. Do you know
                    >> where I
                    >> >> > can find it on the internet?
                    >> >> >
                    >> >> > 73 Eddy N4ABN
                    >> >> >
                    >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                    >> >> >>
                    >> >> >> Eddy,
                    >> >> >>
                    >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                    >> indicates an
                    >> >> >> invalid dxcc country code. Looks like there is no dxcc set in your
                    >> >> >> logger, so the adif export tagged the dxcc as 0.
                    >> >> >>
                    >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                    >> >> try an
                    >> >> >> export again I think it should work.
                    >> >> >>
                    >> >> >> Regards
                    >> >> >> Laurie, VK3AMA
                    >> >> >>
                    >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                    >> >> >> >
                    >> >> >> >
                    >> >> >> > I had a qso with a station TO2D today. He was on an island
                    >> >> dxpedition.
                    >> >> >> > Saint Barthelemy DXpedition 2012
                    >> >> >> > HB9EOU, HB9CVC
                    >> >> >> >
                    >> >> >> > St. Barthelemy
                    >> >> >> >
                    >> >> >> > The U30 is not accepting it. The error message is below. How do
                    >> >> I get
                    >> >> >> > the program to recognize the qso?
                    >> >> >> >
                    >> >> >> >
                    >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                    >> >> >> >
                    >> >> >> > ERROR: >>>
                    >> >> >> >
                    >> >> >>
                    >> >>
                    >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                    >>
                    >> >>
                    >> >> >>
                    >> >> >> > <EOR>
                    >> >> >> >
                    >> >> >> >
                    >> >> >> > 73 Eddy N4ABN
                    >> >> >> >
                    >> >> >> >
                    >> >> >> >
                    >> >> >> >
                    >> >> >>
                    >> >> >
                    >> >>
                    >>
                  • signal
                    Hi Laurie, Thanks for your help Laurie. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                    Message 9 of 13 , Jul 28, 2012
                    • 0 Attachment
                      Hi Laurie,

                      Thanks for your help Laurie.

                      73 Eddy N4ABN


                      On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                       

                      OK Eddy,
                      I have forwarded this email thread to the U30 developer, John OE3JPK
                      I wont publish his email address here, but it is listed on the U30 page
                      http://www.u30.hf-core.at/ just above the flags counter

                      Regards
                      Laurie VK3AMA

                      On 28/07/2012 5:21 PM, signal wrote:
                      >
                      >
                      > Laurie,
                      >
                      > Yes I looked and I believe it's logged correct. This is a partial of
                      > the log below...
                      >
                      > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                      > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                      > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                      > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                      > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                      > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                      > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                      > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                      > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                      > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                      > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                      > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                      > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                      > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                      > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                      > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                      >
                      >
                      > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                      >>
                      >> Eddy,
                      >>
                      >> Have you confirmed that the correct code is in the adif file?
                      >>
                      >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                      >> haven't seen any evidence of it modifying the adif.
                      >>
                      >> If the correct code is in your adif, and U30 is reporting the dxcc code
                      >> as 0 then that will need to be taken up with the author of U30. I could
                      >> forward the email to him if it is clear that your adif file has the
                      >> correct code and U30 is reporting otherwise.
                      >>
                      >> BTW the adif tag will be <DXCC:3>516
                      >>
                      >> Laurie, VK3AMA
                      >>
                      >> On 28/07/2012 5:01 PM, signal wrote:
                      >> >
                      >> >
                      >> > Hi Laurie,
                      >> >
                      >> > I opened the log to see what it is logged for the DXCC code and that's
                      >> > what it shows (516) but when it's imported into U30 it's changed and
                      >> > gets reported as an error. Can I correct the problem some how or is
                      >> > that not supposed to be done by me?
                      >> >
                      >> > 73 Eddy N4ABN
                      >> >
                      >> >
                      >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                      >> >>
                      >> >> Eddy,
                      >> >>
                      >> >> I put TO2D into DXKeeper and it comes back as 516
                      >> >>
                      >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                      >> as 516
                      >> >> See it here...
                      >> >> http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                      >> >>
                      >> >> de Laurie, VK3AMA
                      >> >>
                      >> >> On 28/07/2012 4:41 PM, signal wrote:
                      >> >> >
                      >> >> >
                      >> >> > Hi Laurie,
                      >> >> >
                      >> >> > I can't find what the DXCC country code should be. Do you know
                      >> where I
                      >> >> > can find it on the internet?
                      >> >> >
                      >> >> > 73 Eddy N4ABN
                      >> >> >
                      >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                      >> >> >>
                      >> >> >> Eddy,
                      >> >> >>
                      >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                      >> indicates an
                      >> >> >> invalid dxcc country code. Looks like there is no dxcc set in your
                      >> >> >> logger, so the adif export tagged the dxcc as 0.
                      >> >> >>
                      >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                      >> >> try an
                      >> >> >> export again I think it should work.
                      >> >> >>
                      >> >> >> Regards
                      >> >> >> Laurie, VK3AMA
                      >> >> >>
                      >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                      >> >> >> >
                      >> >> >> >
                      >> >> >> > I had a qso with a station TO2D today. He was on an island
                      >> >> dxpedition.
                      >> >> >> > Saint Barthelemy DXpedition 2012
                      >> >> >> > HB9EOU, HB9CVC
                      >> >> >> >
                      >> >> >> > St. Barthelemy
                      >> >> >> >
                      >> >> >> > The U30 is not accepting it. The error message is below. How do
                      >> >> I get
                      >> >> >> > the program to recognize the qso?
                      >> >> >> >
                      >> >> >> >
                      >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                      >> >> >> >
                      >> >> >> > ERROR: >>>
                      >> >> >> >
                      >> >> >>
                      >> >>
                      >> <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                      >>
                      >> >>
                      >> >> >>
                      >> >> >> > <EOR>
                      >> >> >> >
                      >> >> >> >
                      >> >> >> > 73 Eddy N4ABN
                      >> >> >> >
                      >> >> >> >
                      >> >> >> >
                      >> >> >> >
                      >> >> >>
                      >> >> >
                      >> >>
                      >>


                      -- 
                      If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                      
                      https://sites.google.com/site/n4abnradio/
                    • dl6xaz
                      Hi Eddy and Laurie, just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This
                      Message 10 of 13 , Jul 28, 2012
                      • 0 Attachment
                        Hi Eddy and Laurie,
                        just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
                        vy73 Fred DL6XAZ


                        --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
                        >
                        > Hi Laurie,
                        >
                        > Thanks for your help Laurie.
                        >
                        > 73 Eddy N4ABN
                        >
                        >
                        > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                        > >
                        > > OK Eddy,
                        > > I have forwarded this email thread to the U30 developer, John OE3JPK
                        > > I wont publish his email address here, but it is listed on the U30 page
                        > > http://www.u30.hf-core.at/ just above the flags counter
                        > >
                        > > Regards
                        > > Laurie VK3AMA
                        > >
                        > > On 28/07/2012 5:21 PM, signal wrote:
                        > > >
                        > > >
                        > > > Laurie,
                        > > >
                        > > > Yes I looked and I believe it's logged correct. This is a partial of
                        > > > the log below...
                        > > >
                        > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                        > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                        > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                        > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                        > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                        > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                        > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                        > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                        > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                        > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                        > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                        > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                        > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                        > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                        > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                        > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                        > > >
                        > > >
                        > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                        > > >>
                        > > >> Eddy,
                        > > >>
                        > > >> Have you confirmed that the correct code is in the adif file?
                        > > >>
                        > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                        > > >> haven't seen any evidence of it modifying the adif.
                        > > >>
                        > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
                        > > >> as 0 then that will need to be taken up with the author of U30. I could
                        > > >> forward the email to him if it is clear that your adif file has the
                        > > >> correct code and U30 is reporting otherwise.
                        > > >>
                        > > >> BTW the adif tag will be <DXCC:3>516
                        > > >>
                        > > >> Laurie, VK3AMA
                        > > >>
                        > > >> On 28/07/2012 5:01 PM, signal wrote:
                        > > >> >
                        > > >> >
                        > > >> > Hi Laurie,
                        > > >> >
                        > > >> > I opened the log to see what it is logged for the DXCC code and
                        > > that's
                        > > >> > what it shows (516) but when it's imported into U30 it's changed and
                        > > >> > gets reported as an error. Can I correct the problem some how or is
                        > > >> > that not supposed to be done by me?
                        > > >> >
                        > > >> > 73 Eddy N4ABN
                        > > >> >
                        > > >> >
                        > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                        > > >> >>
                        > > >> >> Eddy,
                        > > >> >>
                        > > >> >> I put TO2D into DXKeeper and it comes back as 516
                        > > >> >>
                        > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                        > > >> as 516
                        > > >> >> See it here...
                        > > >> >>
                        > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                        > > >> >>
                        > > >> >> de Laurie, VK3AMA
                        > > >> >>
                        > > >> >> On 28/07/2012 4:41 PM, signal wrote:
                        > > >> >> >
                        > > >> >> >
                        > > >> >> > Hi Laurie,
                        > > >> >> >
                        > > >> >> > I can't find what the DXCC country code should be. Do you know
                        > > >> where I
                        > > >> >> > can find it on the internet?
                        > > >> >> >
                        > > >> >> > 73 Eddy N4ABN
                        > > >> >> >
                        > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                        > > >> >> >>
                        > > >> >> >> Eddy,
                        > > >> >> >>
                        > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                        > > >> indicates an
                        > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
                        > > your
                        > > >> >> >> logger, so the adif export tagged the dxcc as 0.
                        > > >> >> >>
                        > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                        > > >> >> try an
                        > > >> >> >> export again I think it should work.
                        > > >> >> >>
                        > > >> >> >> Regards
                        > > >> >> >> Laurie, VK3AMA
                        > > >> >> >>
                        > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >> > I had a qso with a station TO2D today. He was on an island
                        > > >> >> dxpedition.
                        > > >> >> >> > Saint Barthelemy DXpedition 2012
                        > > >> >> >> > HB9EOU, HB9CVC
                        > > >> >> >> >
                        > > >> >> >> > St. Barthelemy
                        > > >> >> >> >
                        > > >> >> >> > The U30 is not accepting it. The error message is below. How do
                        > > >> >> I get
                        > > >> >> >> > the program to recognize the qso?
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                        > > >> >> >> >
                        > > >> >> >> > ERROR: >>>
                        > > >> >> >> >
                        > > >> >> >>
                        > > >> >>
                        > > >>
                        > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                        > >
                        > > >>
                        > > >> >>
                        > > >> >> >>
                        > > >> >> >> > <EOR>
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >> > 73 Eddy N4ABN
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >> >
                        > > >> >> >>
                        > > >> >> >
                        > > >> >>
                        > > >>
                        > >
                        > >
                        >
                        > --
                        > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                        >
                        > https://sites.google.com/site/n4abnradio/
                        >
                      • signal
                        Hi Fred, I don t know how many other members have had qso s with TO2D but they are going to be there till next month sometime. 73 Eddy N4ABN ... -- If you do
                        Message 11 of 13 , Jul 28, 2012
                        • 0 Attachment
                          Hi Fred,

                          I don't know how many other members have had qso's with TO2D but they are going to be there till next month sometime.

                          73 Eddy N4ABN


                          On 7/28/2012 2:59 PM, dl6xaz wrote:
                           

                          Hi Eddy and Laurie,
                          just as a postscript to your exchange: I get an error msg due to the prefix ZQ2 which was used in Gibraltar earlier this summer. This corresponds to the TO prefix you discussed. I second Laurie's view that this is a case for our brilliant programmer John to give it a look. Most likely U30 is comparing our log entries to a file like CTY.DAT or similar which has not been complemented yet. I strongly suppose this to happen again with the Olympiad prefixes used by British stns now.
                          vy73 Fred DL6XAZ

                          --- In 30MDG@yahoogroups.com, signal <signalhz@...> wrote:
                          >
                          > Hi Laurie,
                          >
                          > Thanks for your help Laurie.
                          >
                          > 73 Eddy N4ABN
                          >
                          >
                          > On 7/28/2012 4:25 AM, Laurie, VK3AMA wrote:
                          > >
                          > > OK Eddy,
                          > > I have forwarded this email thread to the U30 developer, John OE3JPK
                          > > I wont publish his email address here, but it is listed on the U30 page
                          > > http://www.u30.hf-core.at/ just above the flags counter
                          > >
                          > > Regards
                          > > Laurie VK3AMA
                          > >
                          > > On 28/07/2012 5:21 PM, signal wrote:
                          > > >
                          > > >
                          > > > Laurie,
                          > > >
                          > > > Yes I looked and I believe it's logged correct. This is a partial of
                          > > > the log below...
                          > > >
                          > > > <Band:3>30M <Call:4>TO2D <APP_DXKEEPER_DXCCPREFIX:2>FJ <DXCC:3>516
                          > > > <Freq:9>10.140209 <Mode:4>RTTY <Name:5>Saint <Operator:5>N4ABN
                          > > > <QSL_Sent:1>N <QSL_Via:6>HB9EOU <QSO_DATE:8>20120727
                          > > > <TIME_OFF:6>223816 <TIME_ON:6>223115 <QTH:6>HB9EOU <RST_Rcvd:3>599
                          > > > <RST_Sent:3>599 <TX_PWR:2>10 <CONT:2>SA <ITUZ:1>8 <CQZ:2>11
                          > > > <IOTA:6>NA-146 <GRIDSQUARE:6>FK87ov <ADDRESS:30>HB9EOU, HB9CVC, St.
                          > > > Barthelemy <PFX:3>TO2 <STATION_CALLSIGN:5>N4ABN
                          > > > <OWNER_CALLSIGN:5>N4ABN <A_INDEX:1>4 <K_INDEX:1>0 <SFI:3>123
                          > > > <ANT_AZ:1>0 <ANT_EL:1>0 <RX_PWR:1>0 <DISTANCE:7>1395.32 <LAT:11>N017
                          > > > 54.000 <LON:11>W062 48.000 <QSO_COMPLETE:1>Y <QSO_RANDOM:1>0
                          > > > <WEB:26>http://st-barth.hb9eme.ch/ <QSL_SENT_VIA:1>D <QSL_RCVD_VIA:1>D
                          > > > <FORCE_INIT:1>0 <EQSL_QSL_SENT:1>Y <EQSL_QSL_RCVD:1>N
                          > > > <EQSL_QSLSDATE:8>20120727 <APP_EQSL_QTH_NICKNAME:8>HavenNEW
                          > > > <LOTW_QSL_SENT:1>Y <LOTW_QSL_RCVD:1>N <LOTW_QSLSDATE:8>20120727
                          > > > <APP_DXKeeper_ClubLogDate:19>4000-01-01 00:00:00
                          > > > <APP_DXKEEPER_MY_QTHID:8>HavenNEW <EOR>
                          > > >
                          > > >
                          > > > On 7/28/2012 3:16 AM, Laurie, VK3AMA wrote:
                          > > >>
                          > > >> Eddy,
                          > > >>
                          > > >> Have you confirmed that the correct code is in the adif file?
                          > > >>
                          > > >> I wouldn't expect U30 to modify the adif file. When I have used U30, I
                          > > >> haven't seen any evidence of it modifying the adif.
                          > > >>
                          > > >> If the correct code is in your adif, and U30 is reporting the dxcc code
                          > > >> as 0 then that will need to be taken up with the author of U30. I could
                          > > >> forward the email to him if it is clear that your adif file has the
                          > > >> correct code and U30 is reporting otherwise.
                          > > >>
                          > > >> BTW the adif tag will be <DXCC:3>516
                          > > >>
                          > > >> Laurie, VK3AMA
                          > > >>
                          > > >> On 28/07/2012 5:01 PM, signal wrote:
                          > > >> >
                          > > >> >
                          > > >> > Hi Laurie,
                          > > >> >
                          > > >> > I opened the log to see what it is logged for the DXCC code and
                          > > that's
                          > > >> > what it shows (516) but when it's imported into U30 it's changed and
                          > > >> > gets reported as an error. Can I correct the problem some how or is
                          > > >> > that not supposed to be done by me?
                          > > >> >
                          > > >> > 73 Eddy N4ABN
                          > > >> >
                          > > >> >
                          > > >> > On 7/28/2012 2:47 AM, Laurie, VK3AMA wrote:
                          > > >> >>
                          > > >> >> Eddy,
                          > > >> >>
                          > > >> >> I put TO2D into DXKeeper and it comes back as 516
                          > > >> >>
                          > > >> >> The April 2012 DXCC list from the ARRL also lists Saint Barthelemy
                          > > >> as 516
                          > > >> >> See it here...
                          > > >> >>
                          > > http://www.arrl.org/files/file/DXCC/2012%20DXCC%20Current_G%281%29.pdf
                          > > >> >>
                          > > >> >> de Laurie, VK3AMA
                          > > >> >>
                          > > >> >> On 28/07/2012 4:41 PM, signal wrote:
                          > > >> >> >
                          > > >> >> >
                          > > >> >> > Hi Laurie,
                          > > >> >> >
                          > > >> >> > I can't find what the DXCC country code should be. Do you know
                          > > >> where I
                          > > >> >> > can find it on the internet?
                          > > >> >> >
                          > > >> >> > 73 Eddy N4ABN
                          > > >> >> >
                          > > >> >> > On 7/28/2012 2:03 AM, Laurie, VK3AMA wrote:
                          > > >> >> >>
                          > > >> >> >> Eddy,
                          > > >> >> >>
                          > > >> >> >> You will notice this *<DXCC:1>0* in your adif file. Zero
                          > > >> indicates an
                          > > >> >> >> invalid dxcc country code. Looks like there is no dxcc set in
                          > > your
                          > > >> >> >> logger, so the adif export tagged the dxcc as 0.
                          > > >> >> >>
                          > > >> >> >> If you adjust the QSO in your logger to the correct dxcc and then
                          > > >> >> try an
                          > > >> >> >> export again I think it should work.
                          > > >> >> >>
                          > > >> >> >> Regards
                          > > >> >> >> Laurie, VK3AMA
                          > > >> >> >>
                          > > >> >> >> On 28/07/2012 2:25 PM, signal wrote:
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >> > I had a qso with a station TO2D today. He was on an island
                          > > >> >> dxpedition.
                          > > >> >> >> > Saint Barthelemy DXpedition 2012
                          > > >> >> >> > HB9EOU, HB9CVC
                          > > >> >> >> >
                          > > >> >> >> > St. Barthelemy
                          > > >> >> >> >
                          > > >> >> >> > The U30 is not accepting it. The error message is below. How do
                          > > >> >> I get
                          > > >> >> >> > the program to recognize the qso?
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >> > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                          > > >> >> >> >
                          > > >> >> >> > ERROR: >>>
                          > > >> >> >> >
                          > > >> >> >>
                          > > >> >>
                          > > >>
                          > > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                          > >
                          > > >>
                          > > >> >>
                          > > >> >> >>
                          > > >> >> >> > <EOR>
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >> > 73 Eddy N4ABN
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >> >
                          > > >> >> >>
                          > > >> >> >
                          > > >> >>
                          > > >>
                          > >
                          > >
                          >
                          > --
                          > If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                          >
                          > https://sites.google.com/site/n4abnradio/
                          >


                          -- 
                          If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                          
                          https://sites.google.com/site/n4abnradio/
                        • Laurie, VK3AMA
                          Just received advice from the U30 developer. Some DXpeditions callsigns have to be coded into U30 with the correct DXCC Entity. This is needed when the
                          Message 12 of 13 , Jul 29, 2012
                          • 0 Attachment
                            Just received advice from the U30 developer.

                            Some DXpeditions callsigns have to be coded into U30 with the correct
                            DXCC Entity.
                            This is needed when the callsign format is associated with more than one
                            DXCC Entity.

                            Current examples
                            TO2D = Saint Barthelemy
                            TO2U = St Pierre & Miquelon

                            Also Some special event callsigns that follow no known Country/Callsign
                            format have to be added to U30.

                            Updates to U30 are rolled-out every week.

                            de Laurie, VK3AMA


                            On 28/07/2012 2:25 PM, signal wrote:
                            >
                            >
                            > I had a qso with a station TO2D today. He was on an island dxpedition.
                            > Saint Barthelemy DXpedition 2012
                            > HB9EOU, HB9CVC
                            >
                            > St. Barthelemy
                            >
                            > The U30 is not accepting it. The error message is below. How do I get
                            > the program to recognize the qso?
                            >
                            >
                            > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                            >
                            > ERROR: >>>
                            > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                            > <EOR>
                            >
                            >
                            > 73 Eddy N4ABN
                            >
                          • signal
                            Hi Laurie, Updated earlier and it fixed it. 73 Eddy N4ABN ... -- If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                            Message 13 of 13 , Jul 30, 2012
                            • 0 Attachment
                              Hi Laurie,

                              Updated earlier and it fixed it.

                              73 Eddy N4ABN


                              On 7/29/2012 9:54 PM, Laurie, VK3AMA wrote:
                               

                              Just received advice from the U30 developer.

                              Some DXpeditions callsigns have to be coded into U30 with the correct
                              DXCC Entity.
                              This is needed when the callsign format is associated with more than one
                              DXCC Entity.

                              Current examples
                              TO2D = Saint Barthelemy
                              TO2U = St Pierre & Miquelon

                              Also Some special event callsigns that follow no known Country/Callsign
                              format have to be added to U30.

                              Updates to U30 are rolled-out every week.

                              de Laurie, VK3AMA

                              On 28/07/2012 2:25 PM, signal wrote:
                              >
                              >
                              > I had a qso with a station TO2D today. He was on an island dxpedition.
                              > Saint Barthelemy DXpedition 2012
                              > HB9EOU, HB9CVC
                              >
                              > St. Barthelemy
                              >
                              > The U30 is not accepting it. The error message is below. How do I get
                              > the program to recognize the qso?
                              >
                              >
                              > ===> Log-ERROR: CALL-Assignment not possible ->> TO2D
                              >
                              > ERROR: >>>
                              > <CALL:4>TO2D<DXCC:1>0<CONT:2>AS<COUNTRY:0><QSO_DATE:8>20120727<MODE:4>RTTY<UTC:4>2231<TIME_ON:6>223115<TIME_OFF:6>223816<FREQ:3>30M<RST_SENT:0><TX_PWR:2>10<GRIDSQUARE:6>FK87OV<OPERATOR:5>N4ABN
                              > <EOR>
                              >
                              >
                              > 73 Eddy N4ABN
                              >


                              -- 
                              If you do not feel comfortable with firearms, maybe you will be more comfortable as a victim.
                              
                              https://sites.google.com/site/n4abnradio/
                            Your message has been successfully submitted and would be delivered to recipients shortly.