I could not get AnyRail to save the layout in .jpg form, so I took a picture of it
with my cell phone and uploaded it into the file section, 'Marklin_81865_set_2_loops_layout.jpg'.
For those who have not used AnyRail, there is a free version out there. You are limited in
what you can do with it (the free version), but hey,for a begginer like me, it is very helpful.
Ok, now the laughter (or 'what a novice comments') can begin and Jonathon, as far as the engine going
into a bar.... it's a German engine, so it must be going into a pub ;)
From: mark2playz <mark.markham@...
Sent: Monday, April 1, 2013 11:50 AM
Subject: [Z_Scale] Re: Track crossing question
For those of us you don't have Anyrail, you might want to upload a jpeg version. BTW I rarely laugh at any layout.
--- In mailto:z_scale%40yahoogroups.com, Eddie Hen <southridge90@...> wrote:
> Thanks for the advice Mark. I have uploaded the track layout in the file section named Marklin
> _81865_set_2_ Loops_Layout.any . If you have time, please
> take a look at it. You might even get a good laugh at what I'm trying to do........
> From: mark2playz <mark.markham@...>
> To: mailto:z_scale%40yahoogroups.com
> Sent: Saturday, March 30, 2013 10:31 PM
> Subject: [Z_Scale] Track crossing question
> Welcome to Z. Here's some thoughts on you track crossing question.
> If you consider a clearance for an over/under crossing is 1 1/4" you could consider a 4% grade, you could do the grade in about 32".
> The 90-degree crossing is unique to Rokuhan. You should be able to connect the Marklin track to the Rokuhan crossing using the Rokuhan A014 track adapter.
> Hope this helps,
[Non-text portions of this message have been removed]