A couple of things. First, I remember there was an issue with
Heavyweather writing to C:\Heavyweather\currdat.lst no matter where
you installed the application. I can not remember the exact details,
but it would be best to install Heavyweather in it's default
location. That might explain why WUHU is not seeing the changes in
currdat.lst that you have currently configured.
If you re-install HW to it's default location, you will need to stop
WUHU and point it to the c:\Heavyweather\currdat.lst file.
Secondly, you need to update your CWOP server list to the following:
CWOP APRS Servers (top to bottom entry)
There have been some changes at CWOP, requiring the above server list
over what you have right now.
--- In email@example.com
> I do have have bata 2.0, my son made certain of that. I did re-
> the WU info. Here it is below.
> CWOP ID CW 7081
> Latitude 4382.42N
> Longitude 12143.48W
> CWOP APRS Servers (top to bottom entry)
> arizona.aprs2.net port 23
> indiana.aprs2.net port 23
> socal.aprs2.net port 23
> newengland.aprs2.net port 2
> No offsets; all multipliers = 1; no time base tweaks.
> I found disable rain sensor and wind sensor unchecked, and just
> checked them since I have not yet connected the rain sensor (I'm at
> 4200 feet in Central Oregon, everything is frozen until probably
> March, so I haven't bothered to connect the rain gauge yet.) I am
> the process of relocating the wind sensor and forgot to disable the
> wind sensor during the process.
> All alarms are off because I am not sure I want to use them at the
> time. Once I get the SW operating again I will experiment with the
> --- In firstname.lastname@example.org, "wuhu_software"
> <wuhu_software@> wrote:
> > Dan,
> > Did you re-install Heavyweather Beta 2.0 from the website?
> > the one from the CD will not work.
> > Did you re-enter your WU information and press start?
> > Also, tell me what are the general settings in WUHU?
> > --- In email@example.com, "mazzietrain"
> > <mazzietrain@> wrote:
> > >
> > > I am new to this, having received a La Crosse wheather station
> > my
> > > son, an avid weather fan. I did have it working and taking
> > from
> > > the Heavy Weather currdat.lst file and uploading to CWO. Then
> > > something broke.
> > >
> > > I have reinstalled both Heavy Weather and WUHU twice, I still
> > a
> > > disconnect. The data is in currdat.lst, but it does not appear
> > WUHU
> > > and consequently no data is being transmitted to CWO.
> > >
> > > Any help or hints out there would be greatly appreciated.
> > >
> > > thanks,
> > >
> > > dan
> > >