You will notice next to each variable there is a < or >.
If it is a < variable, when the actual reading is less than your
setting, it will fire the action. The action will not fire again
until the "Reset" value has been reached.
So if it is low outdoor temp (<) is 5 degrees, with a reset of 15,
the action will fire once below 5, but will not fire again until the
temp goes back up to at least 15. This prevents the action from
happening all the time.
If you mess up your values and resets, the action will fire all the
--- In email@example.com
, "Norman E. Avila G."
> Hi, i want to setup alerts in WUHU, seems like an interesting
> I have managed to send me a SMS (via a php script made for me to
> my weatherstation detects a Wind gust above 50kph and is working
> that receive like 3 or 4 sms with the same info.
> I put 50k as alert and 40 as reset, but will like to fine tune
> other parameters for example
> 1. Temp below 10C
> 2. Rain in 24hrs above 50mm
> in this cases the value when temp is falling or ir rains it will
> but the condition will remain, for example 51mm, will this make to
> lot of SMS ?? how is this configurable ???
> the other, is same as this will like to receive a weather report
> parameters , not an alert but a programated action lets say every
> this possible ?
> Norman E. Avila G.
> USA (415) 287-0310
> GUA (502) 2360-9950