I ll find out the answers to all four questions when I visit with our Director of EMS. Hopefully, we can get these bad boys working with the WUHU SoftwareMessage 1 of 12 , Jul 3, 2008View Source
I'll find out the answers to all four questions when I visit with our Director of EMS. Hopefully, we can get these bad boys working with the WUHU Software and reporting information to WU, CWOP, and Ham Weather.
Thanks for your help!Check Out My Weather Blog Exclusively At:
Personal Weather Station Reporting To:
CoCoRaHS County Coordinator
SKYARN Trained Storm Spotter
----- Original Message ----
From: wuhu_software <wuhu_software@...>
Sent: Tuesday, July 1, 2008 4:35:45 PM
Subject: [wuhu_software_group] Re: Davis Systems Supported by WUHU
I have a couple of questions about those stations.
Do you know any of the following?
1) Do the stations have a logger? If so, have you set the logging
interval? It appears that the Davis DLL does assume that the station
has a logger but I do not know anything about these stations.
2) Do you know the inches of water per tip of the rain bucket? I
would guess it would default to .1 In?
3) Do you know the baud rate of the consoles and do you know how to
set that? It should be a value like 1200 or 2400.
4) Do you use a version of Weatherlink to communicate with the
--- In wuhu_software_ group@yahoogroup s.com, Michael Detwiler
<cookevilleweatherg uy@...> wrote:
>the insight. It'd be great if we could get the WM II
and the Wizard 3 to communicate. Until our Emergency OPS Center gets
in their new building with the new Davis system, we are stuck with
these. Let me know what you find out.
> ----- Original Message ----
> From: wuhu_software <wuhu_software@ ...>
> To: wuhu_software_ group@yahoogroup s.com
> Sent: Monday, June 30, 2008 4:57:06 PM
> Subject: [wuhu_software_ group] Re: Davis Systems Supported by WUHU
> I am using the Vantage Pro DLL 2.3 to communicate with their
> It says that it supports:
> "Vantage Pro, Vantage Pro2 or Envoy system and Weatherlink for
> Vantage Pro."
> There is another DLL on their site that says it supports:
> "Contains the file "weatherlink. dll" and related files. This 32-
> DLL can be used on Windows 95, 98 and NT platforms. It canhere
> communicate with Monitor II, Wizard III, II, IIs and Perception
> I will have to investigate that DLL to see what functions are
> DLL page at Davis:
> http://www.davisnet .com/support/ weather/software _dllsdk.asp
> --- In wuhu_software_ group@yahoogroup s.com, Michael Detwiler
> <cookevilleweatherg uy@> wrote:
> > I found out the names of the two models I'm looking to see if the
> fantastic WUHU software supports...
> > One is the Davis Weather Monitor II and the other is the Davis
> Weather Wizard III.....it is for our Emergency Operations Center
> in our town. They'd like to get the information sent out on theweb
> and I offered my help. A new center is under construction and will
> have all new equipment (eventually! ).
> > thoughts?
> > ----- Original Message ----
> > From: Michael <cookevilleweatherg uy@>
> > To: wuhu_software_ group@yahoogroup s.com
> > Sent: Sunday, June 29, 2008 10:36:20 PM
> > Subject: [wuhu_software_ group] Davis Systems Supported by WUHU
> > Hey Gang:
> > Was wondering what other Davis systems the WUHU software would be
> > compatible with? Noticed the list only had the VP2 on it.
> > Thanks...