I'm having a few minor issues with WSPR 2.11, XP Pro, Dell laptop,
Pentium M 1.6GHz, 2GB RAM, real serial port, Edirol UA-5 USB sound
interface, Yeasu FT-817nd.
1. Despite the docs saying you must use 48KHz sampling, when the UA-5
was set for 48KHz, I only got one decode every half hour or so, in spite
of having excellent looking traces on the display. Changing the sampling
rate to 44.1KHz fixed the problem, now I'm often getting 3 or 4 decodes
per time slot.
2. There is a 2-10 second delay between the time the software says it's
transmitting, and the FT-817nd actually going into transmit mode. Using
CAT control for PTT.
3. Band-> 2M sets dial freq to 144.488, wsprnet.org says the 2M dial
freq should be 144.489
73, Ross N4RP
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”