> In OTWINCFG, there is neither any option for Command nor NMEA. I was
> tempted to put both port A and B into auto mode, but the manual has
> advised that only one port should be in AUTO mode and not both.
> Are there any other ways to work around this issue? I have no problem
> swapping the GPS and PC between ports A and B.
You could swap GPS and PC or you could start out with:
port A = KISS connected to the PC
port B = AUTO connected to the GPS
You can still send commands to the OT2 through the KISS software.
Of course the ideal setup for the OT2 is the Garmin Nuvi 350, hence the GARMIN choice in OTWINCFG for both ports.
Scott 'might' be convinced into adding a NMEA mode to both ports, but the auto was intended to include that.