Still haven't posted an updated version, but the next one will also include
a bootloader update. This actually reverts a change I made earlier in an
attempt to fix a clock problem with the SMT prototypes.
System startup is now significantly faster, partly because of the bootloader
code change and partly because I modified the startup code so that the PLL
is now initialized before the copy down and zero out code runs. That bit of
code isn't very long but before the PLL starts, the CPU is running at a
whopping 8 kHz clock speed!
This also seems to fix another problem I was having. The reason the tracker
takes a few seconds to reset when you give it a reset command or enter
config mode is that the only way it has to reset and get to the bootloader
is to wait for a watchdog timeout. With the watchdog timer set on high
speed (about 300 ms timeout, based on a not-very-accurate internal clock) it
was resetting before it could finish initialization, so I had it set to low
Anyway, you'll no longer have to sit around for a few seconds waiting for
the bootloader to start. The delay was just long enough that you'd start
thinking something was wrong, and it always bugged me.