At 08:58 PM 4/4/2013, w9bu_lists wrote:
>I'm not real crazy about the installation using the supplied
>mini-USB to USB cable. I don't think it's long enough to attach the
>board to the VCO can and get the USB cable routed out past external
>speaker connector as described in the manual.
Follow-up...I bought a cable from NewEgg that has a right angle
mini-USB on one end and a straight USB-A connector on the other end.
The cable is 3 feet long so I'll be able to run the cable out of the
DR-135 case and plug directly into a computer or a USB extension cable.
The cable made by StarTech and the part number is USB2HABM3RA. Price was $4.99.
When I get the T3 installed with its velcro pads, I'll take a photo.