No, you won't get position data from the GPS in KISS mode. There was
discussion about a standard for passing GPS data in KISS frames, but
that happened after Roger died and as far as I know there's no add-on
for UI-View that will parse it.
On 11/5/2011 2:51 PM, tony@... wrote:
> I am attempting to get this configuration to work and am having no luck
> with the GPS data feeding into UI-View.
> The configuration I have is the T2-301,T2-301 Serial + Power Cable and
> Serial Splitter Cable.
> Port A is connected to UI-View and I can receive data.
> Port B is connected to the GPS via cabling that has worked with T2's in
> the past.
> Both ports are set to 4800 baud. Port A is set to KISS and Port B is set
> to Auto.
> With UI-View running I get no info from the GPS receiver. This tracking
> is beaconing W5ADC-6 and will be up most of the time over the next few
> days. The location is currently fixed in UI-View.
> Is this configuration even possible? If so, what am I doing wrong?