I routinely mount my 100/800 CNC with the center bolts on the
I assume yours is the LW version. If so, there should be no concern
about using the two center bolts to mount it.
--- In firstname.lastname@example.org, "sheaeagle" <TEAShea@a...> wrote:
> I will be receiving my 100 f8 in about two weeks. I have received
> the Losmandy GM 8 on which I will mount it and I have a question.
> Would it be sufficient to mount the scope to the dovetail mounting
> plate using just two 1/4" 20 bolts. The pre-drilled holes in the
> Losmandy Universal mounting plate are not spaced to allow use of
> outer holes on the TMB rings (which are spaced 2.36" apart).
> Accordingly, unless I want to drill new holes, I would have to use
> just the center line holes in the mounting plate.
> Thanks in advance for the advice
> Tom Shea