... Subject: [softrock40] Connections to Creative X-Fi USB 5.1 ... Connect the radio s RX jack to the sound card s line in jack Connect the radio s TX jack
Message 1 of 2
, Nov 1, 2012
----- Original Message -----
Subject: [softrock40] Connections to Creative X-Fi USB 5.1
> I want to make sure I understand what on the sound card connects to what on my Ensemble RXTX.
>Connect the sound card to a PC USB port
Connect the radio's RX jack to the sound card's 'line in' jack
Connect the radio's TX jack to the 'rear' jack on the sound card
So far so good. But for speech TX/RX with a Softrock you need 2 sound systems. Or for digital if you want to hear the signal.
Often the connections below go to the computer's on-board system.
The actual labelling of inputs and outputs differs between cards as do the options and mixer settings.
>Connect the headphones to the sound card's headphone jack
>Connect speakers to the sound card's Left/Right RCA jacks (using the adapter the guy didn't send me)
These extra outputs are for surround sound, cards need to be setup for 2 speakers. These are not used.
>Optionally, connect a microphone for SSB to the sound card's 'mic' jack.
73 Alan G4ZFQ
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.