... Subject: [softrock40] boosting i/q audio level... ... sylvain, You need to use the line input. Most spoundcards are too sensitive. It is very unlikely that
Message 1 of 2
, Jun 30, 2012
----- Original Message -----
Subject: [softrock40] boosting i/q audio level...
> I have an issue with one single board computer I am using behind a Softrock
> VHF ensemble. This motherboard has only stereo input on the "Line in" plug.
> The microphone input is mono... The gain on this channel seems too low. I
> usually use a HP Laptop offering a good quality audio preamp on the
> microphone input...
> Do you have any suggestion on a small preamp I could build ? I think I will
> try something simple with one LM324 containing 4 op-amps, but they are not
> very wideband, knowing my sound card behind is sampling at 48Khz, so that
> is not really an issue.
You need to use the line input.
Most spoundcards are too sensitive. It is very unlikely that you need an amplifier.
Weak signals will be very low in amplitude but strong signals will fully drive a soundcard.
73 Alan G4ZFQ
Your message has been successfully submitted and would be delivered to recipients shortly.
Changes have not been saved
Press OK to abandon changes or Cancel to continue editing
Your browser is not supported
Kindly note that Groups does not support 7.0 or earlier versions of Internet Explorer.
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox. If you are using IE 9 or later, make sure you turn off Compatibility View.